How to replace the Heated Oxygen Sensor 2 on Chevrolet Cobalt?

Vehicle heightening and suitable support are necessary before starting to replace the heated Oxygen Sensor 2. Withe the wheel drive shaft heat shield off the technician will need to note the path of the heated Oxygen Sensor (HO2S) electrical cabling. To access the ho2s electrical connector in the engine compartment first bend carefully the edge of the channel on the left-hand side of the Exhaust Heat Shield outboard. This releases the ho2s electrical harness for removal. First remove the ho2s using the Oxygen Sensor wrench (J 39194-C) and then lower the ho2s electrical harness away from the vehicle underbody. Before installing the original ho2s item coat its threads in saturn p/n 24185279 or equivalent anti-seize compound. To complete ho2s installation please use the Oxygen Sensor wrench (J 39194-C) for tightening the sensor to 41 n.m (30 lb ft) on the pipe. Reinstall the ho2s electrical harness following its original placement while avoiding wire damage to the Exhaust Heat Shield's channel. The Exhaust Heat Shield channel edge must be bent on its lh side inboard to hold the ho2s electrical harness into place before connecting the ho2s electrical connector. For the last step of the procedure reinstall the wheel drive shaft heat shield before lowering the vehicle.

OEM Chevrolet Cobalt Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oxygen Sensors found

View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12611127
$41.85 MSRP: $85.00
You Save: $43.15 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Replaces: 12609001
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12589380
$93.94 MSRP: $190.80
You Save: $96.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Wideband Air/Fuel Sensor; Air / Fuel Ratio Sensor; Air/Fuel Sensor; Front Oxygen Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12580827
$64.54 MSRP: $131.10
You Save: $66.56 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12578576
$92.04 MSRP: $186.94
You Save: $94.90 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12616506
$79.62 MSRP: $161.72
You Save: $82.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 2); Rear Oxygen Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Oxygen Sensor
Part Number: 12568234
$54.36 MSRP: $110.42
You Save: $56.06 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Front Oxygen Sensor
- Replaces: 12569496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Oxygen Sensor

Our website offers an extensive catalog of genuine Chevrolet Cobalt Oxygen Sensor at unbeatable prices. Every OEM Chevrolet Cobalt Oxygen Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Oxygen Sensor Parts Questions & Experts Answers

Oxygen Sensor
12578576
Q: How to replace the Heated Oxygen Sensor 2 on Chevrolet Cobalt?
A: Vehicle heightening and suitable support are necessary before starting to replace the heated Oxygen Sensor 2. Withe the wheel drive shaft heat shield off the technician will need to note the path of the heated Oxygen Sensor (HO2S) electrical cabling. To access the ho2s electrical connector in the engine compartment first bend carefully the edge of the channel on the left-hand side of the Exhaust Heat Shield outboard. This releases the ho2s electrical harness for removal. First remove the ho2s using the Oxygen Sensor wrench (J 39194-C) and then lower the ho2s electrical harness away from the vehicle underbody. Before installing the original ho2s item coat its threads in saturn p/n 24185279 or equivalent anti-seize compound. To complete ho2s installation please use the Oxygen Sensor wrench (J 39194-C) for tightening the sensor to 41 n.m (30 lb ft) on the pipe. Reinstall the ho2s electrical harness following its original placement while avoiding wire damage to the Exhaust Heat Shield's channel. The Exhaust Heat Shield channel edge must be bent on its lh side inboard to hold the ho2s electrical harness into place before connecting the ho2s electrical connector. For the last step of the procedure reinstall the wheel drive shaft heat shield before lowering the vehicle.

Related Chevrolet Cobalt Parts

Browse Chevrolet Cobalt Oxygen Sensor by Years

2010 2009 2008 2007 2006 2005