How to replace the Ignition Control Module (ICM) on Chevrolet Cobalt?

The Ignition Control Module (ICM) needs to be replaced by turning off the ignition first. Take out the accelerator cable from the bracket. Then take out the accelerator cable bracket bolt and bracket. When removing the icm, disconnect the icm harness connector, remove the icm retaining screws, and remove the icm from the ignition coil housing. For installation, install the new icm into the ignition coil housing with the interconnect and seal correctly aligned before tightening the retaining screws to 1.5 n.m (13 lb in). Connect the icm harness connector; reinstall the accelerator cable bracket and tighten it with bracket bolt at 10 n.m (18 lb in). Finally use a bracket to attach the accelerator cable on the bracket.

OEM Chevrolet Cobalt Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Control Modules found

View related parts
Chevrolet Cobalt Ignition Module
Part Number: 19300922
$107.29 MSRP: $220.48
You Save: $113.19 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Coil Module; Module, Distributor (Also Knock Sensor)
- Replaces: 12580215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Ignition Coil
Part Number: 12584368
$51.09 MSRP: $105.01
You Save: $53.92 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Ignition Module; Coil
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Ignition Coil
Part Number: 12580538
$189.97 MSRP: $340.76
You Save: $150.79 (45%)
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Ignition Module; Coil
- Replaces: 12569276
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

Chevrolet Cobalt Ignition Control Module

Our website offers an extensive catalog of genuine Chevrolet Cobalt Ignition Control Module at unbeatable prices. Every OEM Chevrolet Cobalt Ignition Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Ignition Control Module Parts Questions & Experts Answers

Ignition Module
19300922
Q: How to replace the Ignition Control Module (ICM) on Chevrolet Cobalt?
A: The Ignition Control Module (ICM) needs to be replaced by turning off the ignition first. Take out the accelerator cable from the bracket. Then take out the accelerator cable bracket bolt and bracket. When removing the icm, disconnect the icm harness connector, remove the icm retaining screws, and remove the icm from the ignition coil housing. For installation, install the new icm into the ignition coil housing with the interconnect and seal correctly aligned before tightening the retaining screws to 1.5 n.m (13 lb in). Connect the icm harness connector; reinstall the accelerator cable bracket and tighten it with bracket bolt at 10 n.m (18 lb in). Finally use a bracket to attach the accelerator cable on the bracket.