How to replace the Crankshaft Position Sensor on Chevrolet Cobalt?

To replace the Crankshaft Position Sensor, you must first remove the Starter. Although this may involve dismantling the entire system, it would definitely be worth it. A well-maintained motor is likely to stay in good shape for a very long time and save you a lot of expenses. Next, pull the engine wiring harness electrical connector back out of the crankshaft position (CKP) sensor and remove the ckp sensor bolt as well as the ckp sensor from the vehicle. For the installation, the ckp sensor o-ring seal should be lubricated with clean engine oil prior to installing the ckp sensor. Fit the ckp sensor bolt and tightenit to 10 nm (89 lb in). Reattach the engine wiring harness electrical connector to the ckp sensor and then finally reinstate the Starter.

OEM Chevrolet Cobalt Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
Chevrolet Cobalt Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Crankshaft Position Sensor
Part Number: 12567712
$43.69 MSRP: $88.74
You Save: $45.05 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 1103703, 10456295, 24576398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Crankshaft Position Sensor
Part Number: 12789959
$28.77 MSRP: $54.03
You Save: $25.26 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS

Chevrolet Cobalt Crankshaft Position Sensor

Our website offers an extensive catalog of genuine Chevrolet Cobalt Crankshaft Position Sensor at unbeatable prices. Every OEM Chevrolet Cobalt Crankshaft Position Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor, Green Line
12588992
Q: How to replace the Crankshaft Position Sensor on Chevrolet Cobalt?
A: To replace the Crankshaft Position Sensor, you must first remove the Starter. Although this may involve dismantling the entire system, it would definitely be worth it. A well-maintained motor is likely to stay in good shape for a very long time and save you a lot of expenses. Next, pull the engine wiring harness electrical connector back out of the crankshaft position (CKP) sensor and remove the ckp sensor bolt as well as the ckp sensor from the vehicle. For the installation, the ckp sensor o-ring seal should be lubricated with clean engine oil prior to installing the ckp sensor. Fit the ckp sensor bolt and tightenit to 10 nm (89 lb in). Reattach the engine wiring harness electrical connector to the ckp sensor and then finally reinstate the Starter.