How to replace the blower motor on 2009 Chevrolet Colorado?

The blower motor can be replaced by removing the right hinge pillar trim panel and then removing the mounting screws and the cooling tube. Disassemble the electrical connector and take off the motor. Installation requires the connection of the electrical connector, installation of the cooling tube, and the mounting of the screws then reattach the trim panel.

OEM 2009 Chevrolet Colorado Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2009 Chevrolet Colorado Blower Motor Part Number: 89019178
$126.90 MSRP: $260.78
You Save: $133.88 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Air Conditioner Evaporator Blower; HVAC Blower Motor; Blower Assembly; Fan & Motor; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 89019052, 89018843, 89018663, 89018412
- Item Weight: 4.70 Pounds
- Item Dimensions: 10.2 x 9.7 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89019178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado Blower Motor

With a comprehensive array of OEM 2009 Chevrolet Colorado Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2009 Chevrolet Colorado?
A: The blower motor can be replaced by removing the right hinge pillar trim panel and then removing the mounting screws and the cooling tube. Disassemble the electrical connector and take off the motor. Installation requires the connection of the electrical connector, installation of the cooling tube, and the mounting of the screws then reattach the trim panel.