How to Service and Repair the Turn Signal Switch on 2009 Chevrolet Impala?

In order to change the turn signal switch, take off the steering column trim covers and un-assemble the wire harness assembly. Unplug turn signal switch connector and push the connectors out of the bulkhead connector. Eliminate the switch bolts and remove the switch. Install the switch and connectors again and also the trim covers.

OEM 2009 Chevrolet Impala Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2009 Chevrolet Impala Turn Signal Switch Part Number: 15289426
$65.31 MSRP: $95.09
You Save: $29.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Turn Signal Lamp
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.4 x 5.0 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15289426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Impala Turn Signal Switch

With a comprehensive array of OEM 2009 Chevrolet Impala Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Impala Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Impala Turn Signal Switch Parts and Q&A

Q: How to Service and Repair the Turn Signal Switch on 2009 Chevrolet Impala?
A: In order to change the turn signal switch, take off the steering column trim covers and un-assemble the wire harness assembly. Unplug turn signal switch connector and push the connectors out of the bulkhead connector. Eliminate the switch bolts and remove the switch. Install the switch and connectors again and also the trim covers.