How to replace the Turn Signal Switch on Chevrolet Impala?

Before you replace the Turn Signal Switch you must turn off the SIR system. Reinstall the abrasion sleeve into the steering column wire harness assembly before covering it with the trim parts and making note of the connector placement. First disconnect the wire harness assembly from its strap and then separate the turn signal switch assembly connector from the SIR system coil connector. Push both connectors of the turn signal switch unit out from the bulkhead connection. Use a socket wrench to remove two head screws from behind the turn signal switch and lift off the complete unit from the steering column tilt head assembly. Set the turn signal switch assembly onto the steering column tilt head assembly to make sure its electrical contact touches the turn signal cancel cam assembly. Endeavor to fix the parts securely by threading both pan head screws at 1 N.m torque into the parts. Push the two connectors into the bulkhead connector and join the turn signal switch assembly's connector to SIR coil connector. Place the abrasion sleeve back onto the steering column wire harness assembly with attention to placing the ignition lock cylinder case wiring and connector properly. The upper and lower trim pieces need to be installed before placing the wire harness back in and turning on the SIR function.

OEM Chevrolet Impala Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Turn Signal Switches found

View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 22894392
$39.65 MSRP: $71.74
You Save: $32.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Signal Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Impala | Eco, LS, LT, LTZ | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 23259228
$78.69 MSRP: $115.57
You Save: $36.88 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Turn Signal; Multi Purpose Switch; Signal Switch; Switch, Turn Signal Lamp
- Replaces: 22894393, 23423705
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 15289426
$63.48 MSRP: $93.24
You Save: $29.76 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 23264891
$85.12 MSRP: $128.41
You Save: $43.29 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Signal Switch; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 88964580
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26093873, 26073612, 26085930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 1997988
Product Specifications
- Other Name: Switch, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch; Lever; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Impala | Base | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 1997984
Product Specifications
- Other Name: Switch Assembly, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Combination Switch
Part Number: 19353955
Product Specifications
- Other Name: Lever, Turn Signal Control; Signal Lever; Turn/Wiper Lever; Lever
- Replaces: 25140743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Multifunction Switch
Part Number: 25111261
Product Specifications
- Other Name: Lever, Transmission Control Lever; Multi Purpose Switch; Engagement Switch; Lever
- Replaced by: 19353956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Turn Signal
Part Number: 22510733
Product Specifications
- Other Name: Lever, Turn Signal & Headlamp Dimmer Switch & Windshield Wiper & Windshield Washer; Combination Switch; Signal Lever; Turn/Wiper Switch; Turn/Wiper Lever; Lever; Lever, Turn Signal Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 88964581
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26073613, 26093874, 26085931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Turn Signal Switch
Part Number: 1995974
Product Specifications
- Other Name: Switch Assembly, Turn Signal; Multi Purpose Switch; Signal Switch; Switch, Turn Signal Lamp; Switch, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Turn Signal Switch

Our website offers an extensive catalog of genuine Chevrolet Impala Turn Signal Switch at unbeatable prices. Every OEM Chevrolet Impala Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Switch
15289426
Q: How to replace the Turn Signal Switch on Chevrolet Impala?
A: Before you replace the Turn Signal Switch you must turn off the SIR system. Reinstall the abrasion sleeve into the steering column wire harness assembly before covering it with the trim parts and making note of the connector placement. First disconnect the wire harness assembly from its strap and then separate the turn signal switch assembly connector from the SIR system coil connector. Push both connectors of the turn signal switch unit out from the bulkhead connection. Use a socket wrench to remove two head screws from behind the turn signal switch and lift off the complete unit from the steering column tilt head assembly. Set the turn signal switch assembly onto the steering column tilt head assembly to make sure its electrical contact touches the turn signal cancel cam assembly. Endeavor to fix the parts securely by threading both pan head screws at 1 N.m torque into the parts. Push the two connectors into the bulkhead connector and join the turn signal switch assembly's connector to SIR coil connector. Place the abrasion sleeve back onto the steering column wire harness assembly with attention to placing the ignition lock cylinder case wiring and connector properly. The upper and lower trim pieces need to be installed before placing the wire harness back in and turning on the SIR function.