How to replace the cruise control switch on Chevrolet Impala?

In order to replace the cruise control release switch, position the ignition key in off or lock position, as well as ensure all electrical loads are off. If tools may come into contact with live, electrical terminals, disconnect the negative cable of the battery to avoid personal injury or vehicle damage. Be aware that vehicle is equipped with supplemental inflatable restraint (SIR) system and failure to follow procedure will result in air bag deployment, personal injury or unnecessary repairs. First remove the driver knee bolster panel and then disconnect the electrical connector from the cruise control cruise release switch and a switch out of the retainer in the brake pedal bracket. To install, return cruise control release switch to retainer, reconnect the electrical connector and then adjust the switch, and finally, install the driver side knee bolster panel.

How to adjust the Cruise Control Switch and the stop lamp switch on Chevrolet Impala?

You need to remove the left side insulator panel as your first step for adjusting both cruise control release switch and stop lamp switch. First fully press the Brake Pedal and afterward position the switches into their retainers until they reach full engagement position. Press the Brake Pedal all the way to its stop then keep pulling it backward until you hear no more sounds. The cruise control release switch and the stop lamp switch contacts must activate at pedal movements between 3.5 to 12.5 mm (1/8 to 1/2 in) on the pad's centerline while stop lamp switch contacts trigger at 4.5 mm (3/16 in) beyond the cruise control release switch activation. Put back the left side insulator panel as the final step.

OEM Chevrolet Impala Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Cruise Control Switches found

View related parts
Chevrolet Impala Cruise Switch, Black, Driver Side Part Number: 15819309
$65.21 MSRP: $106.38
You Save: $41.17 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control Selector; Engagement Switch; Set/Resume Switch; Switch
- Position: Driver Side
- Replaces: 15276855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Multifunction Switch Part Number: 25111261
$124.57 MSRP: $232.46
You Save: $107.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Lever, Transmission Control Lever; Multi Purpose Switch; Engagement Switch; Lever
- Replaced by: 19353956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 22801836
$30.55 MSRP: $46.08
You Save: $15.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch
- Replaced by: 23141786
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Impala | Eco, LS, LT, LTZ | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Switch Part Number: 84109253
$38.97 MSRP: $58.78
You Save: $19.81 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control; Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Impala | LS, LT, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 23141788
$29.64 MSRP: $46.38
You Save: $16.74 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch; Switch, Cruise Control Selector
- Replaces: 22801838
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 23141787
$30.55 MSRP: $46.08
You Save: $15.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch; Switch, Cruise Control Selector
- Replaces: 22801837
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 23141786
$30.55 MSRP: $46.08
You Save: $15.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch; Switch, Cruise Control Selector
- Replaces: 22801836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 23141785
$29.75 MSRP: $44.86
You Save: $15.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch; Switch, Cruise Control Selector
- Replaces: 22801834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch Part Number: 15857603
$30.21 MSRP: $47.28
You Save: $17.07 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Cruise Switch, Black Part Number: 15219700
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch; Switch, Cruise Control Selector
- Replaces: 12450080
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Cruise Switch Part Number: 15219674
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch
- Replaces: 12450081
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Release Switch Part Number: 10426455
Product Specifications
- Other Name: Switch, Cruise Control; Cruise Switch; Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Vacuum Switch Part Number: 10024217
Product Specifications
- Other Name: Switch; Release Switch; Switch, Cruise Control Selector; Switch, Cruise Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Cruise Control Switch

Want to cut long-term maintenance and repair costs? Choose OEM Cruise Control Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Cruise Control Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Cruise Control Switch Parts and Q&A

Release Switch
10426455
Q: How to replace the cruise control switch on Chevrolet Impala?
A:
In order to replace the cruise control release switch, position the ignition key in off or lock position, as well as ensure all electrical loads are off. If tools may come into contact with live, electrical terminals, disconnect the negative cable of the battery to avoid personal injury or vehicle damage. Be aware that vehicle is equipped with supplemental inflatable restraint (SIR) system and failure to follow procedure will result in air bag deployment, personal injury or unnecessary repairs. First remove the driver knee bolster panel and then disconnect the electrical connector from the cruise control cruise release switch and a switch out of the retainer in the brake pedal bracket. To install, return cruise control release switch to retainer, reconnect the electrical connector and then adjust the switch, and finally, install the driver side knee bolster panel.
Cruise Switch, Black
15219700
Q: How to adjust the Cruise Control Switch and the stop lamp switch on Chevrolet Impala?
A:
You need to remove the left side insulator panel as your first step for adjusting both cruise control release switch and stop lamp switch. First fully press the Brake Pedal and afterward position the switches into their retainers until they reach full engagement position. Press the Brake Pedal all the way to its stop then keep pulling it backward until you hear no more sounds. The cruise control release switch and the stop lamp switch contacts must activate at pedal movements between 3.5 to 12.5 mm (1/8 to 1/2 in) on the pad's centerline while stop lamp switch contacts trigger at 4.5 mm (3/16 in) beyond the cruise control release switch activation. Put back the left side insulator panel as the final step.