OEM Chevrolet Impala Hazard Warning Switch

Chevrolet Impala Hazard Warning Switch Parts Questions & Experts Answers

• Hazard Switch
  10359031
  Q: How to Access and Replace the Hazard Warning Switch on a Chevrolet Impala?

  A: Start the replacement of the Hazard Warning Switch by putting on the parking brake then carefully take off the bezel from the Ignition Lock Cylinder with a small flat-bladed tool. The transaxle shift control indicator should be set to 1 before positioning the Steering Wheel for access regarding vehicles with column shift systems. Start by taking away the right and left access covers from the instrument panel (I/P) fuse block of the impala but take off the left access cover from the monte carlo. Seamlessly remove the steering column filler while you start opening the instrument panel compartment door on the monte carlo. Reach the Hazard Warning Switch by first unscrewing the screws of the i/p cluster trim plate then pulling the trim plate from the left while being cautious to avoid damage. The electrical connector must be detached from the switch before removing it through the i/p cluster trim plate. First position the new Hazard Warning Switch on the i/p cluster trim plate before you connect its electrical connector. Pull the trim plate toward you through the i/p trim pad while ensuring all retainers reach full seating which allows you to install the i/p cluster trim plate screws at 2 n.m (18 lb in). The left access cover of the i/p fuse block requires installation on the monte carlo while both right and left access covers need to be installed on the impala. Put back the steering column filler while closing the i/p compartment door for the monte carlo and return the Steering Wheel to its original spot. To finish the installation the technician should move vehicles with column shifts into park position while installing their ignition lock bezel before releasing the parking brake.