Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
2009 Chevrolet Malibu Shock Absorber
With a comprehensive array of OEM 2009 Chevrolet Malibu Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Chevrolet Malibu Shock Absorber Parts Questions & Experts Answers
Q: How to replace a shock absorber on 2009 Chevrolet Malibu?
A: First raise and support the vehicle because replacing the shock absorber requires these steps. Place the suitable jack stand under the knuckle while you remove the wheel along with the tire on the vehicle. The shock absorber removal starts with extracting the lower shock absorber bolt and washer from the knuckle before removing the upper shock mounting nuts to retrieve the shock absorber unit. When installing the shock absorber place it inside the vehicle but make sure to fasten the upper shock absorber nuts to 25 Nm (18 lb ft). Putting in the lower shock absorber bolt alongside the washer into the knuckle requires you to secure the bottom bolt with 180 Nm (133 lb ft). Begin by taking out the jack stand from the knuckle and then put on the tire with wheel assembly followed by lowering the vehicle.