How to replace the front cross-member for the steering gear on 2009 Chevrolet Trailblazer?

The vehicle requires lifting then supporting before proceeding with front steering gear crossmember replacement. Remove the mounting bolts for the engine shield before removing the shield altogether. First remove the rear lower Control Arm Bracket and then proceed by uninstalling the steering gear crossmember mounting bolts and the steering gear crossmember. Start installation of the steering gear crossmember first. When installing the steering gear crossmember mounting bolts make sure they reach a torque of 50 nm before tightening them to 37 lb ft. Secure the rear lower Control Arm Bracket to frame mounting bolts at 230 nm (170 lb ft). Mount the engine shield and install its bolts while torquing them to 20 nm (15 lb ft). Finally, lower the vehicle.

OEM 2009 Chevrolet Trailblazer Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2009 Chevrolet Trailblazer Transmission Support
Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.8 x 36.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15090722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Front Crossmember
Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Item Weight: 11.10 Pounds
- Item Dimensions: 32.8 x 10.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15085421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2009 Chevrolet Trailblazer Front Cross-Member

With a comprehensive array of OEM 2009 Chevrolet Trailblazer Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Trailblazer Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Trailblazer Parts Questions & Experts Answers

Q: How to replace the front cross-member for the steering gear on 2009 Chevrolet Trailblazer?
A: The vehicle requires lifting then supporting before proceeding with front steering gear crossmember replacement. Remove the mounting bolts for the engine shield before removing the shield altogether. First remove the rear lower Control Arm Bracket and then proceed by uninstalling the steering gear crossmember mounting bolts and the steering gear crossmember. Start installation of the steering gear crossmember first. When installing the steering gear crossmember mounting bolts make sure they reach a torque of 50 nm before tightening them to 37 lb ft. Secure the rear lower Control Arm Bracket to frame mounting bolts at 230 nm (170 lb ft). Mount the engine shield and install its bolts while torquing them to 20 nm (15 lb ft). Finally, lower the vehicle.