How to replace the front cross-member for the steering gear on Chevrolet Trailblazer?

Before attempting to replace the steering gear crossmember at the front with a new one, first raise and support the vehicle. Take out the engine shield mounting bolts and remove the engine shield. Then remove the rear lower Control Arm Bracket to frame mounting bolts, and the steering gear cross member mounting bolts to disconnect the steering gear cross member. For installation, first put your steering gear crossmember in place, and remember the fastener notice in service precautions. Secure the steering gear crossmember mounting bolts to a torque of 50 n.m (37 lb ft), then attach the rear lower Control Arm Bracket to frame mounting bolts, attach the rear lower Control Arm Bracket to frame mounting bolts to 240 n.m (177 lb ft). Replace the engine shield and its mounting bolts and tighten the bolts to 25 n.m (18 lb ft) and then lower the vehicle.

OEM Chevrolet Trailblazer Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
Chevrolet Trailblazer Transmission Support
Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Front Crossmember
Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Trailblazer Front Cross-Member

Our website offers an extensive catalog of genuine Chevrolet Trailblazer Front Cross-Member at unbeatable prices. Every OEM Chevrolet Trailblazer Front Cross-Member comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Trailblazer Front Cross-Member Parts Questions & Experts Answers

Transmission Support
15090722
Q: How to replace the front cross-member for the steering gear on Chevrolet Trailblazer?
A: Before attempting to replace the steering gear crossmember at the front with a new one, first raise and support the vehicle. Take out the engine shield mounting bolts and remove the engine shield. Then remove the rear lower Control Arm Bracket to frame mounting bolts, and the steering gear cross member mounting bolts to disconnect the steering gear cross member. For installation, first put your steering gear crossmember in place, and remember the fastener notice in service precautions. Secure the steering gear crossmember mounting bolts to a torque of 50 n.m (37 lb ft), then attach the rear lower Control Arm Bracket to frame mounting bolts, attach the rear lower Control Arm Bracket to frame mounting bolts to 240 n.m (177 lb ft). Replace the engine shield and its mounting bolts and tighten the bolts to 25 n.m (18 lb ft) and then lower the vehicle.