ChevyParts
My Garage
My Account
Cart
OEM 2009 GMC Canyon Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
Product Specifications- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: 89018325
- Item Weight: 5.20 Pounds
- Item Dimensions: 16.4 x 13.6 x 9.6 inches
- Condition: New
- SKU: 89018834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator, A/C Evaporator
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.3 x 16.5 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89018984
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Canyon Evaporator
With a comprehensive array of OEM 2009 GMC Canyon Evaporator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Evaporator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 GMC Canyon Parts Questions & Experts Answers
- Q: How to replace the air conditioning evaporator core on 2009 GMC Canyon?A: The air conditioning evaporator core replacement requires HVAC module assembly separation through screw removal which disconnects its two halves. The next step involves removing the evaporator temperature sensor control module screw and placing the module correctly before moving on to separate the HVAC module assembly (1, 4). Start by removing the evaporator temperature sensor from the evaporator after which you should remove the evaporator core from the HVAC module assembly. The new evaporator core installation requires refrigerant oil addition which must be done according to the refrigerant system capacities for system capacity information. Position the evaporator core within the HVAC module assembly and secure it with the evaporator temperature sensor after installing the seal on the assembly halves. The HVAC module assembly requires proper screw tightening to 1.9 Nm (17 lb in) for its two halves and 1.9 Nm (17 lb in) for the evaporator temperature sensor control module screw. The last procedure involves reinstallation of the HVAC module assembly.
Related 2009 GMC Canyon Parts
2009 GMC Canyon Blower Motor Resistor
2009 GMC Canyon A/C Accumulator
2009 GMC Canyon A/C Compressor Cut-Out Switches
2009 GMC Canyon A/C Expansion Valve
2009 GMC Canyon A/C Hose
2009 GMC Canyon A/C Orifice Tube
2009 GMC Canyon A/C Service Cap
2009 GMC Canyon A/C Switch
2009 GMC Canyon A/C System Valve Core
2009 GMC Canyon Ambient Temperature Sensor
2009 GMC Canyon Blend Door Actuator
2009 GMC Canyon Blower Control Switches