How to replace the pitman arm on 2009 GMC Sierra 1500?

You must begin the process of Pitman Arm replacement by removing the steering gear before fixing it in a vise fixture. Start by removing the Pitman Arm nut along with the washer before pulling off the Pitman Arm from the Pitman Arm shaft through the use of either the Pitman Arm puller (J 6632-01) or (J 29107-A). The new Pitman Arm gets installed onto the steering gear by using both a new Pitman Arm washer and nut . Tighten the nut until reaching 250 nm (184 lb ft). Follow the completion of the task by uninstalling the steering gear from the vise before reinstallation. Adjustment of the front toe must be performed as needed.

OEM 2009 GMC Sierra 1500 Pitman Arm

Steering Pitman Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pitman Arm found

View related parts
2009 GMC Sierra 1500 Pitman Arm Part Number: 19434290
$45.98 MSRP: $112.19
You Save: $66.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman
- Replaced by: 85819774
- Condition: New
- SKU: 19434290
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 GMC Sierra 1500 Submodels:
- Denali, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2009 GMC Sierra 1500 Pitman Arm

With a comprehensive array of OEM 2009 GMC Sierra 1500 Pitman Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Sierra 1500 Pitman Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Sierra 1500 Pitman Arm Parts and Q&A

Q: How to replace the pitman arm on 2009 GMC Sierra 1500?
A: You must begin the process of Pitman Arm replacement by removing the steering gear before fixing it in a vise fixture. Start by removing the Pitman Arm nut along with the washer before pulling off the Pitman Arm from the Pitman Arm shaft through the use of either the Pitman Arm puller (J 6632-01) or (J 29107-A). The new Pitman Arm gets installed onto the steering gear by using both a new Pitman Arm washer and nut . Tighten the nut until reaching 250 nm (184 lb ft). Follow the completion of the task by uninstalling the steering gear from the vise before reinstallation. Adjustment of the front toe must be performed as needed.