How to replace the engine oil pressure switch on 2010 Buick Lucerne?

Engine oil pressure sensor replacement requires removal of the shield's heat shield nut before moving forward to the sensor and switch. First disconnect the engine oil pressure sensor electrical connector then remove the engine oil pressure sensor. When installing this component make sure to place the engine oil pressure sensor in position before tightening to a torque value of 16 Nm (12 lb ft). Install the engine oil pressure sensor heat shield before connecting its electrical connector. Install the nut and secure it to 10 Nm (89 lb in).

OEM 2010 Buick Lucerne Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2010 Buick Lucerne Pressure Switch Part Number: 12635958
$31.13 MSRP: $51.28
You Save: $20.15 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Engine Oil Pressure Indicator; Engine Oil Pressure Switch; Oil Pressure Sensor; Oil Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor; Switch, Engine Oil Pressure/Temperature
- Replaced by: 19436254
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CXL, CXS, Super | 8 Cyl 4.6 L GAS

2010 Buick Lucerne Oil Pressure Switch

With a comprehensive array of OEM 2010 Buick Lucerne Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2010 Buick Lucerne?
A: Engine oil pressure sensor replacement requires removal of the shield's heat shield nut before moving forward to the sensor and switch. First disconnect the engine oil pressure sensor electrical connector then remove the engine oil pressure sensor. When installing this component make sure to place the engine oil pressure sensor in position before tightening to a torque value of 16 Nm (12 lb ft). Install the engine oil pressure sensor heat shield before connecting its electrical connector. Install the nut and secure it to 10 Nm (89 lb in).