How to replace the right side engine mount bracket on 2010 Cadillac CTS?

Rearrangement of the right side Engine Mount Bracket starts with taking off the right side Engine Mount. Disassemble both front Engine Mount Bracket mounting bolts and rear Engine Mount Bracket mounting bolts (2, 3). The next step is to remove the clamp bolt that retains the coolant tube then set it properly to the side. First remove the Engine Mount Bracket retaining bolt which attaches behind the engine coolant tube before pulling out the Engine Mount Bracket from the car. Insert the Engine Mount Bracket into its installation position and loosely install the rear Engine Mount Bracket retaining bolts (3, 2). Fitting the front Engine Mount Bracket retaining bolts should be done without applying torque at this stage. The Engine Mount Bracket retaining bolt should have its installation behind the engine coolant tube followed by a torque of 38 nm (28 lb ft). Joint than 60 nm (42 lb ft) for the upper rear mount bracket bolt while tightening both rear lower bracket bolts to 38 nm (28 lb ft) and front mount bracket bolts to 60 nm (42 lb ft). Before reattaching the right side Engine Mount you should install the coolant tube retaining clamp bolt then tighten it to 10 nm (87 in ft).

OEM 2010 Cadillac CTS Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mount Brackets found

View related parts
2010 Cadillac CTS Mount Bracket, Passenger Side
Part Number: 15234762
$27.47 MSRP: $43.03
You Save: $15.56 (37%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.7 x 5.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15234762
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V | 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Mount Bracket, Passenger Side
Part Number: 15854018
$84.63 MSRP: $169.90
You Save: $85.27 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 9.2 x 8.2 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15854018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Mount Bracket, Driver Side
Part Number: 15234761
$27.47 MSRP: $43.02
You Save: $15.55 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.6 x 5.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15234761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V | 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Mount Bracket, Driver Side
Part Number: 15854019
$90.01 MSRP: $141.00
You Save: $50.99 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.2 x 5.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15854019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Mount Bracket, Driver Side
Part Number: 25905220
$119.75 MSRP: $188.42
You Save: $68.67 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Replaces: 15234759
- Item Weight: 1.90 Pounds
- Item Dimensions: 9.5 x 9.2 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25905220
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Mount Bracket, Passenger Side
Part Number: 25905221
$96.84 MSRP: $151.69
You Save: $54.85 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Replaces: 15234760
- Item Weight: 1.90 Pounds
- Item Dimensions: 9.3 x 5.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25905221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2010 Cadillac CTS Engine Mount Bracket

With a comprehensive array of OEM 2010 Cadillac CTS Engine Mount Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac CTS Engine Mount Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac CTS Parts Questions & Experts Answers

Q: How to replace the right side engine mount bracket on 2010 Cadillac CTS?
A: Rearrangement of the right side Engine Mount Bracket starts with taking off the right side Engine Mount. Disassemble both front Engine Mount Bracket mounting bolts and rear Engine Mount Bracket mounting bolts (2, 3). The next step is to remove the clamp bolt that retains the coolant tube then set it properly to the side. First remove the Engine Mount Bracket retaining bolt which attaches behind the engine coolant tube before pulling out the Engine Mount Bracket from the car. Insert the Engine Mount Bracket into its installation position and loosely install the rear Engine Mount Bracket retaining bolts (3, 2). Fitting the front Engine Mount Bracket retaining bolts should be done without applying torque at this stage. The Engine Mount Bracket retaining bolt should have its installation behind the engine coolant tube followed by a torque of 38 nm (28 lb ft). Joint than 60 nm (42 lb ft) for the upper rear mount bracket bolt while tightening both rear lower bracket bolts to 38 nm (28 lb ft) and front mount bracket bolts to 60 nm (42 lb ft). Before reattaching the right side Engine Mount you should install the coolant tube retaining clamp bolt then tighten it to 10 nm (87 in ft).