ChevyParts
My Garage
My Account
Cart
OEM 2010 Cadillac DTS Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Drive Belts found
2010 Cadillac DTS Serpentine Belt Part Number: 12646194
$43.55 MSRP: $77.78You Save: $34.23 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt-Generator & A/C Compressor & Power Steering Pump; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12589908, 12616673
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.3 x 4.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12646194
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Cadillac DTS Serpentine Belt Part Number: 12588412
$17.91 MSRP: $29.47You Save: $11.56 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt, Water Pump; Serpentine Belt Drive Kit; Accessory Drive Belt; Water Pump Belt; Serpentine Tensioner; Belt, Drive
- Replaces: 03545016, 12570499, 12555957, 3545016
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 7.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12588412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Cadillac DTS Drive Belt
With a comprehensive array of OEM 2010 Cadillac DTS Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Cadillac DTS Drive Belt Parts Questions & Experts Answers
- Q: How to replace the drive belt on 2010 Cadillac DTS?A: Starting Drive Belt replacement requires users to remove the right front wheelhouse liner from the vehicle. Use a 1/2 inch drive breaker (1/2 inch drive breaker) on the Drive Belt tensioner while leveraging the breaker bar down to untighten the belt. Simultaneously remove the Power Steering Pump Drive Belt before slowly putting back the tensioner to its starting point. After removing the belt from the lower pulley and idlers raise the vehicle partially. Begin Drive Belt installation by passing it through all pulleys except the Power Steering Pump then lower the vehicle while reimplementing the 1/2 inch drive breaker bar to the Drive Belt tensioner. The tension release should be activated by pressing down on the breaker bar while guiding the belt to settle onto the Power Steering Pump pulley and all adjacent pulleys. Thoroughly look for Drive Belt alignment while inspecting its routing before you install the right front wheelhouse liner. Additionally you should start the engine to confirm proper belt and accessory functioning.