OEM 2010 Cadillac SRX Fuel Injector

2010 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace a fuel injector on 2010 Cadillac SRX?

  A: One must first empty pressure from the fuel system before beginning replacement procedures. Uninstall both the upper Intake Manifold together with the lower Intake Manifold. Initially you need to remove the retaining clip before unplugging the fuel feed pipe from the injector rail. Clear the debris within the Intake Manifold Fuel Injector entry point by blowing compressed air through the region. When extracting Fuel Rail bolts users should protect injector electrical connector terminals and spray tips from damage then use a support frame to prevent rail damage during operation. After removing the fittings secure them with caps together with plugging all the holes to prevent outside contaminants. Support the Fuel Rail with the fuel injectors while removing it from the system and then separate the Fuel Injector electrical connector lock and its associated electrical connector. Uninstall the Fuel Injector retainer clip and Fuel Injector unit while eliminating the aged Fuel Injector seals. Attention should first go to new Fuel Injector seals before adding the Fuel Injector and its retaining clip. Put back the Fuel Injector electrical connector before activating the lock. You must install the Fuel Rail with installed fuel injectors while tightening Fuel Rail bolts to 10 nm (89 lb in). The Fuel Rail needs the fuel feed pipe connection and the installation of the locking fuel pipe retaining clip. The upper Intake Manifold should get installed at the very end.