OEM 2010 Chevrolet Aveo Clutch Master Cylinder

2010 Chevrolet Aveo Clutch Master Cylinder Parts Questions & Experts Answers

• Q: How to replace the Clutch Master Cylinder on 2010 Chevrolet Aveo?

  A: Begin by draining all clutch/brake fluid out of the reservoir tank before proceeding to disconnect the tank's hose. Start by undoing the locking clip followed by removal of the push rod fixing pin and push rod. The process begins with master cylinder hose clamp removal followed by hose release then removal of the master cylinder pipe and Clutch Master Cylinder nuts to extract the Clutch Master Cylinder. The Clutch Master Cylinder requires precise installation following which secure its position using nuts tightened to 22 nm (16 lb ft). Reroute the master cylinder pipe afterward you should connect the master cylinder hose through a hose clamp for attachment. The push rod fixing pin stands next to the push rod while the locking clip follows. Perform an air bleed on the system while performing clutch pedal adjustment steps. Add clutch/brake fluid to the reservoir until it reaches the max mark.