OEM 2010 Chevrolet Aveo Fuel Rail

2010 Chevrolet Aveo Fuel Rail Parts Questions & Experts Answers

• Q: How to replace the Fuel Injection Fuel Rail Assembly on 2010 Chevrolet Aveo?

  A: The first step to replace a fuel injection Fuel Rail assembly involves decreasing the fuel pressure of the system. Disconnect the battery negative cable followed by deconnection of both the injector connectors and fuel line from the Fuel Rail. The procedure involves eliminating Fuel Rail bolts before extracting both Fuel Rail and injectors. Separate the Fuel Injector retainer clips before lowering the fuel injectors through the retainer clips so you can discard the Fuel Injector o-rings. Start installation by putting Fuel Injector o-rings into place before connecting each Fuel Injector to its position on the Fuel Rail and fastening them via retainer clips. The installation process requires inserting the Fuel Rail with its injectors onto the Intake Manifold. Nevertheless install the Fuel Rail bolts then tighten them to 8 nm (70.8 lb in). Start by placing a dust cap on the Fuel Rail before connecting the fuel line then connect the Fuel Injector connectors and end with reinstallation of the battery's negative cable.