How to replace the automatic transmission Flywheel on 2010 Chevrolet Camaro?

One must start by taking off the automatic transmission then recording the engine Flywheel direction before its removal. The next step requires removal of both the Flywheel bolts before removing the Flywheel. Apply 2 m11x1.5 mm bolts into the holes of the spacer then twist them clockwise to extract the spacer from the Crankshaft end. Users should mount the spacer onto the Crankshaft rear end while using extended Flywheel bolts when installing a spacer. Install the Flywheel while also installing its bolts onto the Crankshaft with threadlock applied according to the specified correct part numbers for adhesives, fluids, lubricants, and sealers. Exercise caution regarding fastener safety. Base the Flywheel bolt installation on a specific order: begin by tightening each bolt to 20 nm (15 lb ft) and move up to 50 nm (37 lb ft) and finish at 100 nm (74 lb ft). The automatic transmission needs to be reinstalled after finishing these procedures.

OEM 2010 Chevrolet Camaro Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Flywheels found

View related parts
2010 Chevrolet Camaro Flywheel Part Number: 24245480
$285.82 MSRP: $689.10
You Save: $403.28 (59%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Item Weight: 33.70 Pounds
- Item Dimensions: 7.5 x 16.4 x 15.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24245480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Camaro Submodels:
- SS | 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Camaro Drive Plate Part Number: 12654640
$132.99 MSRP: $226.41
You Save: $93.42 (42%)
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft; Flywheel
- Replaces: 12553054, 12602448, 12606620, 12637677, 12563136, 12580709
- Item Weight: 7.70 Pounds
- Item Dimensions: 15.6 x 15.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12654640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Camaro Submodels:
- SS, Z28, Z28 SS, ZL1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Camaro Flywheel Part Number: 12571611
$353.23 MSRP: $555.78
You Save: $202.55 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Item Weight: 31.10 Pounds
- Item Dimensions: 16.3 x 17.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12571611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Camaro Submodels:
- LS, LT, Z/28 | 6 Cyl 3.6 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Camaro Drive Plate Part Number: 12727438
$50.37 MSRP: $86.51
You Save: $36.14 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12603197, 12721499, 12689004
- Condition: New
- SKU: 12727438
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Camaro Submodels:
- LS, LT | 6 Cyl 3.6 L GAS

2010 Chevrolet Camaro Flywheel

With a comprehensive array of OEM 2010 Chevrolet Camaro Flywheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Camaro Flywheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Camaro Flywheel Parts and Q&A

Q: How to replace the automatic transmission Flywheel on 2010 Chevrolet Camaro?
A: One must start by taking off the automatic transmission then recording the engine Flywheel direction before its removal. The next step requires removal of both the Flywheel bolts before removing the Flywheel. Apply 2 m11x1.5 mm bolts into the holes of the spacer then twist them clockwise to extract the spacer from the Crankshaft end. Users should mount the spacer onto the Crankshaft rear end while using extended Flywheel bolts when installing a spacer. Install the Flywheel while also installing its bolts onto the Crankshaft with threadlock applied according to the specified correct part numbers for adhesives, fluids, lubricants, and sealers. Exercise caution regarding fastener safety. Base the Flywheel bolt installation on a specific order: begin by tightening each bolt to 20 nm (15 lb ft) and move up to 50 nm (37 lb ft) and finish at 100 nm (74 lb ft). The automatic transmission needs to be reinstalled after finishing these procedures.