OEM 2010 Chevrolet Camaro Fuel Injector

2010 Chevrolet Camaro Fuel Injector Parts Questions & Experts Answers

• Q: How to replace the fuel injectors on 2010 Chevrolet Camaro?

  A: The replacement of fuel injectors requires the user to lower the high side fuel system pressure first. The correct positioning of fuel injectors needs observation to achieve proper alignment throughout installation. The fuel injection Fuel Rail assembly belongs to bank 1 or bank 2 for removal. The installation procedure starts with discarding three Fuel Injector retaining rings before separating direct fuel injectors and harness as one unit through the electrical connector removal. The j 2619-01 with j-37281-a will help evenly remove the injectors when required. The fuel injectors receive a series of parts removal including the upper o-ring seal as well as plastic spacer and retaining ring and isolator cup and teflon seal. Check the Fuel Rail injector bores using j 39313 together with en-47909 before proceeding with any cleaning operations. Use gm p/n 12345610 (Canadian P/N 993193) or equivalent silicon-free engine oil to lubricate a new o-ring seal before you place it and the retaining ring , isolator cup and plastic spacer and upper o-ring seal onto the fuel injectors. Install the en-48266-1 on the injector tip while omitting teflon seal lubrication before putting the new teflon seal onto the en-48266-1 to create a secure fit in the injector groove. Insert the en-48266-2 onto the injector tip after removing the en-48266-1 while using adjustable force to size the teflon seal during rotation of the en-48266-2. Properly direct the electrical wiring while positioning the direct fuel injectors alongside their harness as a unit before establishing their electrical connector . The last step involves reinstallation of the fuel injection Fuel Rail assembly either for bank 1 or bank 2.