OEM 2010 Chevrolet Camaro Intake Manifold

2010 Chevrolet Camaro Intake Manifold Parts Questions & Experts Answers

• Q: How to replace the intake manifold on 2010 Chevrolet Camaro?

  A: In order to remove the Intake Manifold, first of all, it is necessary to detach the fuel pipe shield and the outlet duct. Remove the Brake Booster Vacuum Hose, positive crankcase ventilation hose (PCV), and purge line off the Intake Manifold. Unbolt the purge solenoid bolt and place the purge solenoid out of the way, and disconnect the throttle body electrical connector. Pull the Intake Manifold bracket bolt and unclip the engine wiring harness from the Intake Manifold. Then you need to unscrew the Intake Manifold bolts and then take out the Intake Manifold and gasket. The new Intake Manifold provided then has to be assembled, gaskets of various kinds have to be added accordingly with a new Intake Manifold Gasket, tighten the Intake Manifold bolts in the sequence to 25 nm (18 lb. Ft), and then clip the engine wiring harness back onto the Intake Manifold. Mount the Intake Manifold bracket bolt and torque it to 23 nm (17 lb ft) and reconnect the throttle body electrical connector, the purge line, the pcv hose, and the Brake Booster Vacuum Hose. Finally, re-install the air outlet duct and the fuel pipe shield.