OEM 2010 Chevrolet Camaro Oil Filter

2010 Chevrolet Camaro Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2010 Chevrolet Camaro?

  A: The process to replace engine oil and Oil Filter begins with turning off the ignition then removing any front compartment sight shield according to necessity. The 6-point socket helps remove the Oil Filter cap while you should watch for usual oil drainage from the Oil Filter chamber into the adapter housing. Do not install a new Oil Filter adapter for this situation. Rise the vehicle and then support it. Discard the old Oil Filter cartridge before proceeding. A suitable drain should be placed below the oil pan Drain Plug while you remove the plug to let complete oil drainage occur. Lower the vehicle and install the Drain Plug of the oil pan with a new o-ring seal while tightening to 20 nm (15 lb ft). Fitting the new Oil Filter cartridge requires engine oil lubrication of the Oil Filter cap threads to both protect the component and make future uninstalls easier. A 6-point socket enables the installer to fasten the Oil Filter cap with a correct torque setting of 25 nm (18 lb ft). Install the oil fill cap before adding appropriate engine oil in the right quantity and finally replace the front compartment sight shield.