How to replace the Crankshaft Position Sensor on 2010 Chevrolet Colorado?

Initially raise the vehicle for support before you begin Crankshaft Position Sensor replacement. Remove the power connector of the engine harness from the OBD II connector of the crankshaft position sensor. Then unscrew the bolt holding the sensor inside the engine block and extract the sensor from its position. Discard both O-ring seals. New O-ring seals require installation on the CKP sensor before applying a light layer of clean engine oil for lubrication. Install the CKP sensor into its block position before you apply GM P/N 12346004 (Canadian P/N 10953480) sealer to the threads of the sensor bolt. Remember to follow fastener safety instructions. Use 10 Nm (89 lb in) torque when installing the CKP sensor bolt. Begin by reconnecting the engine wiring harness electrical connector to the CKP sensor then lower the vehicle for crankshaft (CKP) system variation learn.

OEM 2010 Chevrolet Colorado Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2010 Chevrolet Colorado Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Crankshaft Position Sensor Part Number: 12592515
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12592515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS

2010 Chevrolet Colorado Crankshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet Colorado Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2010 Chevrolet Colorado?
A: Initially raise the vehicle for support before you begin Crankshaft Position Sensor replacement. Remove the power connector of the engine harness from the OBD II connector of the crankshaft position sensor. Then unscrew the bolt holding the sensor inside the engine block and extract the sensor from its position. Discard both O-ring seals. New O-ring seals require installation on the CKP sensor before applying a light layer of clean engine oil for lubrication. Install the CKP sensor into its block position before you apply GM P/N 12346004 (Canadian P/N 10953480) sealer to the threads of the sensor bolt. Remember to follow fastener safety instructions. Use 10 Nm (89 lb in) torque when installing the CKP sensor bolt. Begin by reconnecting the engine wiring harness electrical connector to the CKP sensor then lower the vehicle for crankshaft (CKP) system variation learn.