How to replace the water pump on LLV/LLR with 2.9L or 3.7L engines on 2010 Chevrolet Colorado?

You must empty the cooling system before you start replacing the Water Pump on 2.9l and 3.7l llv/llr engine models. The first step is to take off both the fan and the Drive Belt. To change the Water Pump use j 46406 (Fan Clutch Remover and Installer) to lock down the Water Pump Pulley and remove its bolts before taking off the pulley and Water Pump bolts alongside their gasket when replacing the Water Pump itself. Install a new Water Pump gasket followed by placing the Water Pump on its engine position. Tighten the Water Pump bolts at 10 nm (89 lb in). Secure the Water Pump Pulley with the j 46406 tool and fasten the bolts by tightening them to 25 nm (18 lb ft). Reattach the cooling fan and belt once you put back the j 46406 component. Put required coolant and concentration into the cooling system then check for any fluid leaks.

OEM 2010 Chevrolet Colorado Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

View related parts
2010 Chevrolet Colorado Water Pump Part Number: 12681417
$289.52 MSRP: $561.92
You Save: $272.40 (49%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Pump Kit, Engine Coolant
- Replaced by: 19434033
- Item Weight: 21.00 Pounds
- Item Dimensions: 20.8 x 21.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12681417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Water Pump Part Number: 12620226
$145.44 MSRP: $260.88
You Save: $115.44 (45%)
Product Specifications
- Other Name: Pump, Water; Pump, Engine Coolant
- Replaces: 24576952
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12620226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2010 Chevrolet Colorado Water Pump

With a comprehensive array of OEM 2010 Chevrolet Colorado Water Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado Water Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado Water Pump Parts and Q&A

Q: How to replace the water pump on LLV/LLR with 2.9L or 3.7L engines on 2010 Chevrolet Colorado?
A: You must empty the cooling system before you start replacing the Water Pump on 2.9l and 3.7l llv/llr engine models. The first step is to take off both the fan and the Drive Belt. To change the Water Pump use j 46406 (Fan Clutch Remover and Installer) to lock down the Water Pump Pulley and remove its bolts before taking off the pulley and Water Pump bolts alongside their gasket when replacing the Water Pump itself. Install a new Water Pump gasket followed by placing the Water Pump on its engine position. Tighten the Water Pump bolts at 10 nm (89 lb in). Secure the Water Pump Pulley with the j 46406 tool and fasten the bolts by tightening them to 25 nm (18 lb ft). Reattach the cooling fan and belt once you put back the j 46406 component. Put required coolant and concentration into the cooling system then check for any fluid leaks.