ChevyParts
My Garage
My Account
Cart
OEM 2010 Chevrolet Corvette Rocker Arm
Engine Rocker Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Rocker Arms found
2010 Chevrolet Corvette Rocker Arms
Part Number: 10214664$14.88 MSRP: $23.32You Save: $8.44 (37%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm, Valve Rocker; Rocker Arm
- Replaced by: 12681275
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.4 x 2.1 x 1.5 inches
- Condition: New
- SKU: 10214664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Rocker Arms
Part Number: 12579617$17.99 MSRP: $28.19You Save: $10.20 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Arm, Engine Valve Rocker; Rocker Arm
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.5 x 2.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12579617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Rocker Arms
Part Number: 12579615$16.35 MSRP: $25.61You Save: $9.26 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Arm Assembly-Intake Valve Rocker; Rocker Arm; Arm, Engine Valve Rocker
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.6 x 2.0 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12579615
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Rocker Arm
With a comprehensive array of OEM 2010 Chevrolet Corvette Rocker Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Rocker Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Chevrolet Corvette Rocker Arm Parts Questions & Experts Answers
- Q: How to replace the valve rocker arm and push rods on 2010 Chevrolet Corvette?A: Begin the valve Rocker Arm and push rod replacement by removing the valve Rocker Arm covers and maintain order of all relevant components for redetectable installation. You should detach the valve Rocker Arm bolts after which follow with the removal of rocker arms and pivot support while also removing the pushrods. The valve rocker arms and pushrods should be cleaned before their inspection. Clean engine oil should be used for lubrication when reinstalling both valve rocker arms and pushrods as well as the bolts' flange on the valve rocker arms. Insert the valve Rocker Arm pivot support before you secure the pushrods into the valve lifter sockets and the ends of the rocker arms but defer the Rocker Arm bolt tightening step. The Crankshaft must be rotated until the number one piston reaches top dead center compression position with the sprocket key resting at 1:30 and both sprocket alignment marks pointed to 12 o'clock. The Rocker Arm bolts should be torqued to 30 nm (22 lb ft) while the engine holds the number one firing position for bolts 1, 2, 7, and 8 of the exhaust valve Rocker Arm and bolts 1, 3, 4, and 5 of the intake valve Rocker Arm. The technician must rotate the Crankshaft by 360 degrees before tightening bolts 3, 4, 5, and 6 on the exhaust valve Rocker Arm section to 30 nm (22 lb ft) while bolts 2, 6, 7, and 8 on the intake valve Rocker Arm require similar torque settings. Install the valve Rocker Arm covers as the last step.
Related 2010 Chevrolet Corvette Parts
2010 Chevrolet Corvette Cam Gear
2010 Chevrolet Corvette Coolant Filter
2010 Chevrolet Corvette Crankshaft
2010 Chevrolet Corvette Drain Plug
2010 Chevrolet Corvette Engine Mount Bracket
2010 Chevrolet Corvette Head Gasket
2010 Chevrolet Corvette Oil Cooler
2010 Chevrolet Corvette Oil Pan Baffle
2010 Chevrolet Corvette Oil Pan Gasket
2010 Chevrolet Corvette Piston Ring
2010 Chevrolet Corvette Rod Bearing
2010 Chevrolet Corvette Timing Chain