How to replace the rear Trunk Lid Lift Support on 2010 Chevrolet Corvette?

Begin work on the rear compartment lift window strut by opening its panel and holding it in place. Unplug the lower rear defogger electrical connector from the strut before releasing the retaining clip with a thin flat tool from the lower ball socket. Pull the strut away from the lower ball stud. You must first shift the retaining clamp away from the top strut ball joint socket before disconnecting the electrical wire from the end of the strut when ready to remove. Before installing the strut you must attach the defogger lower electrical connector before placing the strut rod side down into the lower bracket and fastening it to the upper bracket. Finish by linking the defogger upper electrical cord to the strut, taking away the lift window panel support, and lowering the lift window panel.

OEM 2010 Chevrolet Corvette Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lid Lift Support found

View related parts
2010 Chevrolet Corvette Lift Cylinder, Rear Part Number: 15843995
$29.24 MSRP: $45.76
You Save: $16.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut, Rear Hatch Window
- Position: Rear
- Replaces: 10278149
- Item Weight: 0.50 Pounds
- Item Dimensions: 12.0 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15843995
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 50th Anniversary Edition, Base, Grand Sport, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Trunk Lid Lift Support

With a comprehensive array of OEM 2010 Chevrolet Corvette Trunk Lid Lift Support, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Trunk Lid Lift Support are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Trunk Lid Lift Support Parts and Q&A

Q: How to replace the rear Trunk Lid Lift Support on 2010 Chevrolet Corvette?
A: Begin work on the rear compartment lift window strut by opening its panel and holding it in place. Unplug the lower rear defogger electrical connector from the strut before releasing the retaining clip with a thin flat tool from the lower ball socket. Pull the strut away from the lower ball stud. You must first shift the retaining clamp away from the top strut ball joint socket before disconnecting the electrical wire from the end of the strut when ready to remove. Before installing the strut you must attach the defogger lower electrical connector before placing the strut rod side down into the lower bracket and fastening it to the upper bracket. Finish by linking the defogger upper electrical cord to the strut, taking away the lift window panel support, and lowering the lift window panel.