How to replace the door striker anchor plate on 2010 Chevrolet Malibu?

Start the door striker anchor plate change by first removing both the body lock pillar lower trim and lower center pillar trim. Begin by putting marks on the striker position using grease pencil before removing all screws from the door striker then extracting the striker itself. To install the striker position it in the door opening while keeping it aligned with the earlier created marks. Secure the screws tightly to 20 Nm (15 lb ft) using the striker installation. Inspect the door while checking its proper operation after adjusting the door striker appropriately. The procedure ends with reattaching the original front or rear trim before integrating the body lock pillar lower trim along with the lower center pillar trim.

OEM 2010 Chevrolet Malibu Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Strikers found

View related parts
2010 Chevrolet Malibu Lock Cylinder, Green Line, Front
Part Number: 20951578
$8.23 MSRP: $12.25
You Save: $4.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Lock; Upper Striker; Striker; Striker, Door Lock Striker
- Position: Front
- Replaces: 12451683, 15825600, 15825875, 20777165, 15840415, 25863993, 10375393, 25826965
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.8 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20951578
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2010 Chevrolet Malibu Striker, Green Line, Rear
Part Number: 25975053
$32.21 MSRP: $47.94
You Save: $15.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Replaces: 25901219
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 3.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25975053
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2010 Chevrolet Malibu Lower Striker
Part Number: 11609741
$4.59 MSRP: $6.83
You Save: $2.24 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Standard Parts; Striker, Door Lock Striker
- Replaces: 11588780
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 11609741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2010 Chevrolet Malibu Door Striker

With a comprehensive array of OEM 2010 Chevrolet Malibu Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Malibu Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Malibu Door Striker Parts Questions & Experts Answers

Q: How to replace the door striker anchor plate on 2010 Chevrolet Malibu?
A: Start the door striker anchor plate change by first removing both the body lock pillar lower trim and lower center pillar trim. Begin by putting marks on the striker position using grease pencil before removing all screws from the door striker then extracting the striker itself. To install the striker position it in the door opening while keeping it aligned with the earlier created marks. Secure the screws tightly to 20 Nm (15 lb ft) using the striker installation. Inspect the door while checking its proper operation after adjusting the door striker appropriately. The procedure ends with reattaching the original front or rear trim before integrating the body lock pillar lower trim along with the lower center pillar trim.