Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Striker, Rear Compartment Lid Lock Or Liftgate
Position: Rear
Replaces: 25901219
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Standard Parts; Striker, Door Lock Striker
Replaces: 11588780
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Other Name: Striker Assembly-Lift Gate Latch; Striker, Rear Compartment Lid Lock Or Liftgate
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 Chevrolet Malibu | Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
Chevrolet Malibu Door Striker
Our website offers an extensive catalog of genuine Chevrolet Malibu Door Striker at unbeatable prices. Every OEM Chevrolet Malibu Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Malibu Door Striker Parts Questions & Experts Answers
Q: How to replace the rear door striker on Chevrolet Malibu?
A: The first step involves removing the lower body lock pillar trim as well as the lower center pillar trim before replacing the rear door striker. You need to mark the striker position with grease pencil before removing screws from the door striker and pulling out the striker itself. When installing the striker you should place it directly into the door opening and ensure it matches the earlier pencil marks. Fasten the screws to the striker before tightening them to 20 Nm (15 lb ft). Check and adjust the door striker according to needs while performing a final check on door operation. Reinstallation of the front or rear trim comes last before replacing the body lock pillar lower trim and lower center pillar trim.