How to replace the rear door striker anchor plate on 2007 Chevrolet Malibu?

The replacement of the rear door striker anchor plate demands removal of the quarter lower trim panel first. Use a grease pencil to mark the striker position before removing screws from the front door lock striker and afterwards removing both the striker and its shims. Remove the anchor plate after you have removed the front door lock striker and its shims. You should place the anchor plate first after which you should install the door lock shims and striker before using screws to secure them. Secure the door lock striker in correct position by screwing it down to 25 N.m (18 lb ft). The door lock striker needs adjustment if needed. You must reinstall the quarter lower trim panel as the last step.

OEM 2007 Chevrolet Malibu Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Strikers found

View related parts
2007 Chevrolet Malibu Striker, Front
Part Number: 20801140
$9.23 MSRP: $13.74
You Save: $4.51 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Lock; Striker, Rear Compartment Lid Lock Or Liftgate; Striker, Door Lock Striker
- Position: Front
- Replaces: 12451555, 22723518
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20801140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Striker, Rear
Part Number: 22628988
$136.34 MSRP: $203.01
You Save: $66.67 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Rear Compartment Lid Latch; Striker, Rear Compartment Lid Lock Or Liftgate; Striker, Rear Compartment Lid
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22628988
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Striker
Part Number: 15787123
Product Specifications
- Other Name: Striker Assembly-Lift Gate Latch; Striker, Rear Compartment Lid Lock Or Liftgate
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.4 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15787123
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu Door Striker

With a comprehensive array of OEM 2007 Chevrolet Malibu Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Door Striker Parts Questions & Experts Answers

Q: How to replace the rear door striker anchor plate on 2007 Chevrolet Malibu?
A: The replacement of the rear door striker anchor plate demands removal of the quarter lower trim panel first. Use a grease pencil to mark the striker position before removing screws from the front door lock striker and afterwards removing both the striker and its shims. Remove the anchor plate after you have removed the front door lock striker and its shims. You should place the anchor plate first after which you should install the door lock shims and striker before using screws to secure them. Secure the door lock striker in correct position by screwing it down to 25 N.m (18 lb ft). The door lock striker needs adjustment if needed. You must reinstall the quarter lower trim panel as the last step.