How to replace the blower motor on 2010 Chevrolet Silverado 1500?

Start by removing the sound insulator panel if your vehicle uses it. Open the knitted insulation cover by unscrewing its fasteners. Free the electric connection from the motor before removing it. Disassemble the blower motor shield after completion. Push down the retention tab as you rotate the blower motor clockwise off its socket in the heating/ventilation unit and take out the blower motor. Turn the new blower motor into the heater/ventilation module by twisting it clockwise until the retaining ring engages. Secure the insulating cover on top of the blower motor when you attach its electrical connector properly according to safety procedures. After installing the blower motor insulating cover screws with 1.6 Nm of force (14 lb in) replace any available sound insulator panel.

OEM 2010 Chevrolet Silverado 1500 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2010 Chevrolet Silverado 1500 Blower Motor Part Number: 22741027
$143.62 MSRP: $295.12
You Save: $151.50 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower; HVAC Blower Motor; Blower Assembly; Fan & Motor; Blower Case; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 20883397, 25860468, 20760618, 20828731, 52495872, 89018758, 89018283
- Item Weight: 3.10 Pounds
- Item Dimensions: 11.3 x 10.6 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22741027
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Blower Motor Part Number: 20911076
$109.93 MSRP: $225.89
You Save: $115.96 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower (W/Impeller); HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 25785513, 25973845
- Item Weight: 5.20 Pounds
- Item Dimensions: 12.5 x 12.4 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20911076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Blower Motor

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2010 Chevrolet Silverado 1500?
A: Start by removing the sound insulator panel if your vehicle uses it. Open the knitted insulation cover by unscrewing its fasteners. Free the electric connection from the motor before removing it. Disassemble the blower motor shield after completion. Push down the retention tab as you rotate the blower motor clockwise off its socket in the heating/ventilation unit and take out the blower motor. Turn the new blower motor into the heater/ventilation module by twisting it clockwise until the retaining ring engages. Secure the insulating cover on top of the blower motor when you attach its electrical connector properly according to safety procedures. After installing the blower motor insulating cover screws with 1.6 Nm of force (14 lb in) replace any available sound insulator panel.