How to replace the rear brake backing plate on 2010 GMC Canyon?

In order to change the rear brake backing plate, lift and prop the car. Take out the rear wheel speed sensor and pull off the park brake cable. Then take out the wheel cylinder, rear axle shaft. The next step is to install the new backing plate and fasten it and refit the axle shaft, wheel cylinder, and speed sensor.

OEM 2010 GMC Canyon Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
2010 GMC Canyon Backing Plate, Passenger Side Part Number: 19258603
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.9 x 13.7 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19258603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Backing Plate, Driver Side Part Number: 19181926
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Item Weight: 6.20 Pounds
- Item Dimensions: 14.1 x 13.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Splash Shield, Front Part Number: 25832145
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front
- Item Weight: 1.30 Pounds
- Item Dimensions: 13.1 x 12.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25832145
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 GMC Canyon Brake Backing Plate

With a comprehensive array of OEM 2010 GMC Canyon Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Canyon Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Canyon Brake Backing Plate Parts and Q&A

Q: How to replace the rear brake backing plate on 2010 GMC Canyon?
A: In order to change the rear brake backing plate, lift and prop the car. Take out the rear wheel speed sensor and pull off the park brake cable. Then take out the wheel cylinder, rear axle shaft. The next step is to install the new backing plate and fasten it and refit the axle shaft, wheel cylinder, and speed sensor.