How to replace the CV Boot and CV Joint on the Wheel Drive Shaft Inner on 2010 GMC Canyon?

To replace the Wheel Drive Shaft Inner Joint and Boot, secure the driveshaft in a vise. Cut and discard the retaining clamps, then remove the D/O joint housing. Degrease all parts and check for wear. Install new clamps and secure them with a torque wrench. Finally, stroke the D/O joint to disperse grease.

OEM 2010 GMC Canyon CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2010 GMC Canyon Outer Boot Part Number: 89040354
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot
- Position: Front
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.0 x 6.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89040354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Inner Boot Part Number: 89040355
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot
- Position: Front
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.4 x 4.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89040355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 GMC Canyon CV Boot

With a comprehensive array of OEM 2010 GMC Canyon CV Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Canyon CV Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Canyon CV Boot Parts and Q&A

Q: How to replace the CV Boot and CV Joint on the Wheel Drive Shaft Inner on 2010 GMC Canyon?
A: To replace the Wheel Drive Shaft Inner Joint and Boot, secure the driveshaft in a vise. Cut and discard the retaining clamps, then remove the D/O joint housing. Degrease all parts and check for wear. Install new clamps and secure them with a torque wrench. Finally, stroke the D/O joint to disperse grease.