How to replace the rear side door window regulator on 2010 GMC Canyon?

You need to start the rear side door Window Regulator replacement process by dismantling the rear door trim panel and then the rear inside Door Handle and the rear door speaker. The following step involves taking off the rear door water deflector. Start by removing the bolts that attach the rear window to its Window Regulator then increase the rear door window while supporting it. The procedure requires disconnecting the electrical connector from the Window Regulator motor when a31 is present. The Window Regulator requires its bolts to be loosened at keyhole slot locations before removing the holding bolts between regulator and inner panel. Gently pull up the Window Regulator while it moves out from the keyhole slots of the inner panel through the access opening. To install the rear door Window Regulator users must place it through the access hole of the rear door while positioning it on the inner panel through regulator bolt keyhole slots . Screw the rear door Window Regulator bolts to the inner panel with a torque value of 9 nm (80 lb in). The a31 module needs electric connector installation to the Window Regulator motor. Position the window on the Window Regulator carrier plate following its installation along with bolting it to the Window Regulator at 9 nm (80 lb in). The repair work concludes with installation of the rear door water deflector and rear door speaker followed by the rear inside handle and ending with the rear door trim panel.

OEM 2010 GMC Canyon Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2010 GMC Canyon Window Regulator, Front Driver Side
Part Number: 15922914
$138.55 MSRP: $246.30
You Save: $107.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Driver Side
- Replaces: 97247755, 15290840, 15919131
- Item Weight: 3.90 Pounds
- Item Dimensions: 24.4 x 16.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15922914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Window Regulator, Front Passenger Side
Part Number: 15922915
$88.31 MSRP: $242.72
You Save: $154.41 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Passenger Side
- Replaces: 15919132, 15290841, 97247754
- Item Weight: 4.30 Pounds
- Item Dimensions: 5.3 x 24.7 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15922915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Window Regulator, Rear Passenger Side
Part Number: 15922917
$67.59 MSRP: $185.74
You Save: $118.15 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor; Regulator; Regulator, Door And End Gate Window
- Position: Rear Passenger Side
- Replaces: 15113354, 15919134
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.5 x 25.4 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15922917
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Window Regulator, Rear Driver Side
Part Number: 15922916
$104.48 MSRP: $185.74
You Save: $81.26 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor; Regulator; Regulator, Door And End Gate Window
- Position: Rear Driver Side
- Replaces: 15113353, 15919133
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.1 x 25.0 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15922916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Window Regulator, Front Driver Side
Part Number: 15919130
$62.91 MSRP: $113.86
You Save: $50.95 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Driver Side
- Replaces: 97247753
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.2 x 24.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15919130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Window Regulator, Front Passenger Side
Part Number: 15919129
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Passenger Side
- Replaces: 97247752
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.3 x 23.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15919129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 GMC Canyon Window Regulator

With a comprehensive array of OEM 2010 GMC Canyon Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Canyon Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Canyon Parts Questions & Experts Answers

Q: How to replace the rear side door window regulator on 2010 GMC Canyon?
A: You need to start the rear side door Window Regulator replacement process by dismantling the rear door trim panel and then the rear inside Door Handle and the rear door speaker. The following step involves taking off the rear door water deflector. Start by removing the bolts that attach the rear window to its Window Regulator then increase the rear door window while supporting it. The procedure requires disconnecting the electrical connector from the Window Regulator motor when a31 is present. The Window Regulator requires its bolts to be loosened at keyhole slot locations before removing the holding bolts between regulator and inner panel. Gently pull up the Window Regulator while it moves out from the keyhole slots of the inner panel through the access opening. To install the rear door Window Regulator users must place it through the access hole of the rear door while positioning it on the inner panel through regulator bolt keyhole slots . Screw the rear door Window Regulator bolts to the inner panel with a torque value of 9 nm (80 lb in). The a31 module needs electric connector installation to the Window Regulator motor. Position the window on the Window Regulator carrier plate following its installation along with bolting it to the Window Regulator at 9 nm (80 lb in). The repair work concludes with installation of the rear door water deflector and rear door speaker followed by the rear inside handle and ending with the rear door trim panel.