Make sure this part fits

GM 15922917
Window Regulator, Rear Passenger Side

2004-2012 GM

Customer Questions & Expert Answers (8)
GM 15922917 Window Regulator, Rear Passenger Side
  • Part Description
    Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor
  • Position
    Rear Passenger Side
  • Replaces
    15113354, 15919134
  • Manufacturer
    General Motors
Make sure this part fits
$67.59 MSRP: $185.74
You Save: $118.15 (64%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15922917 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15922917 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear door window regulator on Chevrolet Colorado? Posted by Customer
    A:
    The process of replacing a rear door Window Regulator starts with removing the rear door trim panel together with inside Door Handle, speaker, and water deflector. Then, detach the bolts that hold the rear window to the Window Regulator before raising the window. Users of system a31 must unplug the electrical connector from the Window Regulator motor. Loosen the bolts securing the regulator to keyhole slots at its multiple locations allowing removal of the bolts which mount the regulator to the inner panel. Remove the Window Regulator by raising it through the opening of the access hole. Put the rear door Window Regulator through the access hole before setting it against the inner panel with keyhole slots properly aligned with the regulator bolts. Tighten the bolts at the inner panel which anchor the Window Regulator to 9 n.m (80 lb in). Install the electrical connector to the motor of the Window Regulator if a31 is present then carefully position the window support and remove the window from its position on the carrier plate. Secure the window to the regulator by using bolts and tighten these bolts to 9 n.m (80 lb in). The last installation step includes reattaching the rear door water deflector beside adding the speaker followed by the inside handle and trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after reinstalling the window for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Finally, reinstall the front door water deflector and the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the rear side door window regulator for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Begin by removing the rear door trim panel, inside door handle, speaker, and water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the next step if it is equipped with A31 for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the electrical connector from the window regulator motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the torque specification for the fasteners retaining the window regulator for the 2006 GMC Canyon? Posted by Customer
    A:
    Tighten the fasteners to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the rear side door window regulator for the 2010 GMC Canyon? Posted by Customer
    A:
    Begin by removing the rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the process for installing the new window regulator for the 2005 GMC Canyon? Posted by Customer
    A:
    Insert the new window regulator into the front door through the access hole and position it by sliding the regulator bolts into the keyhole slots in the inner panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Regulator, Rear Passenger Side 15922917 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15922917 Window Regulator, Rear Passenger Side is available in the market under the name GM Window Regulator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15922917 Window Regulator, Rear Passenger Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15922917 maintains top performance when functioning as the Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor unit at its Rear Passenger Side. The component 15922917 is constructed from durable material and its dimensions span 8.5 x 25.4 x 15.3 inches while weighing 3.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Regulator; Regulator, Door And End Gate Window. The part 15922917 has available replacement options 15113354, 15919134. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.