How to replace the Windshield Washer Pump on 2010 GMC Savana 1500?

To replace the windshield washer pump, one has to open the hood, pull off the upper fender support and the bolt that is attached to the washer solvent container. Unplug the electrical connector and washer hose and empty the solvent. Install the pump, re-fit all of it and then screw the container then close the hood.

OEM 2010 GMC Savana 1500 Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2010 GMC Savana 1500 Washer Pump Part Number: 89025062
$63.88 MSRP: $131.28
You Save: $67.40 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Windshield Washer W/Seal; Washer Pump Repair Kit; Windshield Washer Pump; Front Washer Pump; Rear Washer Pump; Pump Kit, Windshield Washer.
- Replaces: 22054183, 22039339, 22086739, 22122104, 19150494, 22111435, 22054186, 22071428, 22127653, 88958231
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.7 x 3.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89025062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS

2010 GMC Savana 1500 Washer Pump

With a comprehensive array of OEM 2010 GMC Savana 1500 Washer Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Washer Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Savana 1500 Washer Pump Parts and Q&A

Q: How to replace the Windshield Washer Pump on 2010 GMC Savana 1500?
A: To replace the windshield washer pump, one has to open the hood, pull off the upper fender support and the bolt that is attached to the washer solvent container. Unplug the electrical connector and washer hose and empty the solvent. Install the pump, re-fit all of it and then screw the container then close the hood.