OEM 2010 GMC Sierra 1500 Washer Reservoir

2010 GMC Sierra 1500 Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2010 GMC Sierra 1500?

  A: To change the windshield washer solvent reservoir start by putting the car on stands with support. Take off both the left front wheel assembly and the wheelhouse liner before the left side. You must take the lower outer bolt off from the washer container before lowering the vehicle. Unplug the electrical connectors and remove the Washer Pump hoses (1, 2) from their fender connection at the left side. Lower the vehicle using its Hood Latch and unlock the hood. Take off the washer bottle cap for the windshield. Detach the extra battery tray when available. Use the wheelhouse opening to free the washer container from under the car before removing bolts from the upper windshield washer solvent container and the whole assembly. Transfer the windshield washer solvent to a fresh container for proper disposal. Rephrase the procedure by attaching washer pumps and level indicator to new washer solvent container before putting them together as an assembly. Put the upper windshield washer solvent bolts in position and tighten them to 9 nm. Reinstall the extra battery tray only if it belongs there. Connect both electrical components and pump tubes (1, 2) to their places. Secure the bottom washer container bolt and put back both front wheelhouse components and wheel assembly on the left side. Place windshield solvent into the new washer solvent container and put on its protective cap.