Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 GMC Yukon Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

  • 2010 GMC Yukon Crankshaft Seal - 89060436
    2010 GMC Yukon Crankshaft Seal - 89060436
    2010 GMC Yukon Crankshaft Seal - 89060436
    2010 GMC Yukon Crankshaft Seal Diagram - 89060436
    View related parts

    2010 GMC Yukon Rear Main Seal Part Number: 89060436

    $24.24 MSRP: $39.93
    You Save: $15.69 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
    • Position: Rear
    • Replaces: 12550574, 12585671, 89018162
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 5.1 x 5.3 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89060436
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 GMC Yukon Submodels:
    • Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 GMC Yukon Crankshaft Seal

With a comprehensive array of OEM 2010 GMC Yukon Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Yukon Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Yukon Crankshaft Seal Parts and Q&A

  • Q: How to replace the front crankshaft seal on 2010 GMC Yukon?
    A: A crankshaft balancer needs to be uninstalled first before replacing the front oil seal. Begin the replacement by extracting the crankshaft front oil seal (140) from the front cover. The crankshaft front oil seal sealing surface requires no lubrication and the technician should avoid installing previously used crankshaft front oil seals. Clean engine oil needs application on both the new oil seal's (140) outer surface and the front cover bore. Put the J 41478 guide on the crankshaft front oil seal (140) then place the threaded rod (J 41478) with guide and washer and nut and the oil seal into the crankshaft end. Insert the oil seal into the cover bore using J 41478 while holding its hexagonal installer bolt with one wrench and turning the installer nut with another wrench until the seal reaches total installation depth in the bore. Check that the front cover bore displays an even installation of the oil seal before removing the J 41478 guide. Finally, reinstall the crankshaft balancer.

Related 2010 GMC Yukon Parts

Alternate Year Models

+
2009 GMC Yukon Crankshaft Seal 2011 GMC Yukon Crankshaft Seal