Other Name: Pipe, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
Replaces: 20916307, 15842788, 20928391
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
Buick Enclave Fuel Filler Hose
Our website offers an extensive catalog of genuine Buick Enclave Fuel Filler Hose at unbeatable prices. Every OEM Buick Enclave Fuel Filler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Enclave Fuel Filler Hose Parts Questions & Experts Answers
Q: How to Safely Replace the Fuel Filler Hose on a Buick Enclave?
A: Work on the Fuel Filler Hose requires no smoking or open flames and disconnecting the negative Battery Cable (unless you need battery voltage). First remove the fuel fill cap after which you should dismantle the Fuel Tank fill pipe housing to Fuel Tank fill pipe bolts before draining the Fuel Tank. The first step involves removing the left rear wheel and tire while the following step entails the removal of the left rear wheelhouse liner panel. The vehicle requires removal of the Fuel Tank fill pipe bracket bolt for the operator to extract the Fuel Tank fill pipe assembly from its position. The technician must loosen the Fuel Tank fill hose clamp before extracting the Fuel Tank fill hose. For correct installation first install the Fuel Tank fill hose after which tighten the Fuel Tank fill hose clamp to 3.3 n.m (29 lb in) while ensuring the notch in the hose faces the Fuel Tank tab. The procedure includes positioning the Fuel Tank fill hose on the Fuel Tank while also joining the evaporative emission (EVAP) canister vent rear pipe quick connect fitting to the recirculation line of the Fuel Tank fill pipe. Secure the Fuel Tank fill hose clamp at the tank with 3.3 n.m (29 lb in) torque and put on the Fuel Tank fill pipe bracket bolt which requires a torque of 12 n.m (106 lb in). The installation procedure continues with steps to replace the left rear wheelhouse liner panel and left rear wheel and tire. The technician should then lower the vehicle before finalizing the process by installing the Fuel Tank fill pipe housing to Fuel Tank fill pipe bolts and tightening them to 2 n.m (18 lb in) as well as installing the fuel fill cap.