How to Safely and Correctly Replace a Front Headlight Bulb on Buick LeSabre?

A driver should first turn off the lamp switch then wait for the bulb to cool down before changing the bulb to avoid shard glass injuries. You should handle the bulb by the base only while wearing protective eye gear and keeping the bulb glass untouched plus moisture-free from dirt. Disposal of used bulbs should be proper while all halogen bulbs must remain beyond children's grasp. The replacement procedure for the passenger side high beam headlamp bulb includes separate steps while all remaining headlamps need their bulb (3 or 4) twisted counterclockwise to release retainer tabs before pulling out the bulb to disconnect it from the wire harness. The installer should never contact the bulb or allow moisture exposure because exposing it to these conditions leads to bulb detonation after switch activation. Burn the bulb using alcohol or the appropriate degreaser to prevent explosion following skin oil or moisture contact. Connect the wire harness to the new headlamp bulb and push the bulb (3 or 4) into the headlamp assembly before rotating it clockwise for retainer tab locking. Reinstall the headlamp assembly if required.

OEM Buick LeSabre Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Headlight Bulbs found

View related parts
Buick LeSabre Sealed Beam
Part Number: 16532129
$28.01 MSRP: $52.25
You Save: $24.24 (47%)
ADD TO CART
Product Specifications
- Other Name: Bulb, Headlamp; Headlight; Headlamps; Seal Beam, Capsule/Headlamp/Fog Lamp; Bulb, Capsule/Headlamp/Fog Lamp
- Replaces: 05966200, 5966200
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Bulb & Socket, Green Line
Part Number: 9441732
$13.16 MSRP: $23.52
You Save: $10.36 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Headlamp (High Beam); Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; High Beam; Composite Assembly; Fog Lamp/Turn Signal; Capsule Bulb
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-2005 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Bulb & Socket
Part Number: 19257054
$13.83 MSRP: $24.72
You Save: $10.89 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb Assembly, Headlamp (Low Beam); Fog Light Bulbs; Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; Composite Assembly; Fog Lamp Bulb; Lower Beam Bulb; Bulb; Bulb, Capsule/Headlamp/Fog Lamp
- Replaces: 09441733, 12450177, 01999366, 9441733, 01999357, 1999366, 1999357
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-2005 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Headlamp Bulb
Part Number: 15094219
$29.52 MSRP: $55.41
You Save: $25.89 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bulb, Headlamp (High Beam); Car Bulbs; High Beam Bulb; Bulb, Capsule/Headlamp/Fog Lamp
- Replaces: 25770739
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Sealed Beam
Part Number: 5972698
Product Specifications
- Other Name: Seal Beam; Headlight; Capsule; Headlamps; Seal Beam; Bulb; Fog Lamp; Headlamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Sealed Beam
Part Number: 5930567
Product Specifications
- Other Name: Bulb, Headlamp (High Beam); Headlight; Headlamps; Seal Beam, Capsule/Headlamp/Fog Lamp; Bulb, Sealed Beam.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Headlamp Bulb
Part Number: 19244673
Product Specifications
- Other Name: Bulb Assembly, Headlamp (Low Beam); Headlight; Sealed Beam; Headlamps; Seal Beam, Capsule/Headlamp/Fog Lamp; Bulb, Capsule/Headlamp/Fog Lamp
- Replaces: 16502327
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL

Buick LeSabre Headlight Bulb

Our website offers an extensive catalog of genuine Buick LeSabre Headlight Bulb at unbeatable prices. Every OEM Buick LeSabre Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick LeSabre Headlight Bulb Parts Questions & Experts Answers

Bulb & Socket
19257054
Q: How to Safely and Correctly Replace a Front Headlight Bulb on Buick LeSabre?
A: A driver should first turn off the lamp switch then wait for the bulb to cool down before changing the bulb to avoid shard glass injuries. You should handle the bulb by the base only while wearing protective eye gear and keeping the bulb glass untouched plus moisture-free from dirt. Disposal of used bulbs should be proper while all halogen bulbs must remain beyond children's grasp. The replacement procedure for the passenger side high beam headlamp bulb includes separate steps while all remaining headlamps need their bulb (3 or 4) twisted counterclockwise to release retainer tabs before pulling out the bulb to disconnect it from the wire harness. The installer should never contact the bulb or allow moisture exposure because exposing it to these conditions leads to bulb detonation after switch activation. Burn the bulb using alcohol or the appropriate degreaser to prevent explosion following skin oil or moisture contact. Connect the wire harness to the new headlamp bulb and push the bulb (3 or 4) into the headlamp assembly before rotating it clockwise for retainer tab locking. Reinstall the headlamp assembly if required.