Other Name: Bulb-Back Up Lamp; Back Up Light Bulb; Tail Light Bulbs; Car Bulbs; Bulb; High Mount Stop Lamp, Tail Lamp; B/U Lamp, Tail Lamp; Standard Parts; Tail Lamp
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
Position: Driver Side
Replaces: 16530507
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
Buick LeSabre Tail Light
Our website offers an extensive catalog of genuine Buick LeSabre Tail Light at unbeatable prices. Every OEM Buick LeSabre Tail Light comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick LeSabre Tail Light Parts Questions & Experts Answers
Q: How to properly service and repair the Tail Light on Buick LeSabre?
A: The rear compartment sill plate must be removed before you tackle a tail lamp replacement. Substitute to following the tail lamp connector and grommet through the body when only the bulb needs replacement. First disconnect the tail lamp connector then push the grommet out of its position in the rear end panel. Detach the fasteners securing the tail lamp assembly to the body before removing the assembly. A counterclockwise twist motion of the tail lamp socket will let you detach it from its position while you replace defective bulbs if needed. Route the tail lamp connector and grommet through the body when the tail lamp removal was performed solely for bulb replacement. Position the grommet completely into the body rear end panel before putting the tail lamp bulb into the socket of the tail lamp. Secure the tail lamp socket by turning it clockwise until its tabs match the notches in the tail lamp assembly. Fasten the tail lamp assembly to the body while tightening the fasteners to 6 n.m (53 lb in). The final step requires a tail lamp connector connection followed by placing the rear compartment sill plate back into position.