How to replace the Seat Heater Switch on Buick LeSabre?

The first step to change the heated seat switch requires door trim panel removal. After heating up the seat switch you should pull it out from the door panel by pressing on its tabs. Disconnect the electrical connectors after removing it. The process starts by connecting electrical connectors followed by placing the heated seat switch into the door trim panel and forcing down to activate the retainer clip. Recalibrate the door trim panel as the final step.

OEM Buick LeSabre Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Heater Switch found

View related parts
Buick LeSabre Switch, Driver Side
Part Number: 25654438
Product Specifications
- Other Name: Switch Assembly-Driver Seat Heater; Seat Heater Switch; Switch, Front/Rear Seat Heater
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Seat Heater Switch

Our website offers an extensive catalog of genuine Buick LeSabre Seat Heater Switch at unbeatable prices. Every OEM Buick LeSabre Seat Heater Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick LeSabre Seat Heater Switch Parts Questions & Experts Answers

Switch, Driver Side
25654438
Q: How to replace the Seat Heater Switch on Buick LeSabre?
A: The first step to change the heated seat switch requires door trim panel removal. After heating up the seat switch you should pull it out from the door panel by pressing on its tabs. Disconnect the electrical connectors after removing it. The process starts by connecting electrical connectors followed by placing the heated seat switch into the door trim panel and forcing down to activate the retainer clip. Recalibrate the door trim panel as the final step.