OEM Buick LeSabre Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Knock Sensors found

  • Buick LeSabre Knock Sensor - 12591625
    Buick LeSabre Knock Sensor Diagram - 12591625
    View related parts

    Buick LeSabre Knock Sensor

    Part Number: 12591625
    $66.57 MSRP: $135.22
    You Save: $68.65 (51%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor)
    • Replaces: 10456215
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1996-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
  • Buick LeSabre Knock Sensor - 10456206
    Buick LeSabre Knock Sensor Diagram - 10456206
    View related parts

    Buick LeSabre Knock Sensor

    Part Number: 10456206
    $45.28 MSRP: $84.50
    You Save: $39.22 (47%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor Assembly-Electric Spark Control Knock; Sensor, Distributor (Also Knock Sensor)
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1995 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
  • Buick LeSabre Knock Sensor - 10456019
    Buick LeSabre Knock Sensor Diagram - 10456019
    View related parts
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor)
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1992-1994 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
  • Buick LeSabre Knock Sensor - 10456204
    Buick LeSabre Knock Sensor Diagram - 10456204
    View related parts
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor)
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1995 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Knock Sensor

Our website offers an extensive catalog of genuine Buick LeSabre Knock Sensor at unbeatable prices. Every OEM Buick LeSabre Knock Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick LeSabre Knock Sensor Parts Questions & Experts Answers

  • Q: How to replace the Knock Sensor (KS) on Bank 2 on Buick LeSabre?
    A: Begin bank 2 Knock Sensor (KS) replacement by first turning off the Ignition Switch then safely raising the vehicle while observing all vehicle lifting safety measures. Begin by taking off splash shield bolts then draining the cooling system fluid. The maintenance procedure begins by loosening the two bolts fixing the Knock Sensor heat shield below the freeze plug and block heater on equipped vehicles. Afterward disconnect the electrical connector from the Knock Sensor. You should remove the Knock Sensor which exists inside the engine block. The sensor features a factory-coated thread system that requires factory conditions for proper detonation detection so do not use thread sealant when installing the sensor. Secure the Knock Sensor within the engine block yet maintain torque to 19 nm (14 lb ft). Place the Knock Sensor heat shield back into its correct position while securing its two bolts at 60 nm (44 lb ft). Continue by connecting the electrical connector to the Knock Sensor followed by splash shield installation. Then lower the vehicle and complete coolant filling and level verification.

Related Buick LeSabre Parts