Other Name: Switch Assembly, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch, Turn Signal Lamp
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1988 Buick LeSabre | Base, Collector's Edition, Custom, Estate Wagon, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Signal Switch; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 26093875
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
Buick LeSabre Wiper Switch
Our website offers an extensive catalog of genuine Buick LeSabre Wiper Switch at unbeatable prices. Every OEM Buick LeSabre Wiper Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick LeSabre Wiper Switch Parts Questions & Experts Answers
Q: How to Service the Wiper Switch on Buick LeSabre?
A: You must begin the windshield washer switch task by disconnecting the Battery Cable and removing the Steering Wheel. Start by taking out these tools before moving to the left closeout panel. Separate the two torx(R) bolts from the multifunction switch before you disconnect its electrical access points to remove the switch component. Place the multifunction switch in position then fasten its two torx(R) bolts and tighten them firmly to 7 nm (62 inch lbs.). Set up the electrical wiring and attach the interface connections before putting back the steering column shields along with the left panel cover and Steering Wheel while installing the tilt lever. Finally, enable the sir system.