Make sure this part fits

GM 26057323
Turn Signal Switch

2000-2002 Buick LeSabre

Customer Questions & Expert Answers (7)
GM 26057323 Turn Signal Switch
GM 26057323 Turn Signal Switch
  • Part Description
    Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26057323
    Part DescriptionSwitch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch
    Other NamesSignal Switch; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
    Item Dimensions7.2 x 6.1 x 10.4 inches
    Item Weight2.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26057323
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2002 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26057323 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26057323 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the turn signal switch on Buick LeSabre? Posted by Customer
    A:
    To fix the Turn Signal Switch you first need to remove the battery's negative cable and steer wheel. First you need to take out the tilt lever and steering column shrouds before moving on to the left closeout panel. Twist the two torx(R) bolts off the multifunction switch while disconnecting its electrical ends and the switch falls out. To install the multifunction switch you first put it back into position and fasten it with the two torx(R) bolts while turning them to 7 nm (62 inch lbs.). Pass the electrical wires through the space and connect all electrical components. Replace the steering column covers and install the left panel on top. Repace the Steering Wheel and tilt lever before activating the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service the Wiper Switch on Buick LeSabre? Posted by Customer
    A:
    You must begin the windshield washer switch task by disconnecting the Battery Cable and removing the Steering Wheel. Start by taking out these tools before moving to the left closeout panel. Separate the two torx(R) bolts from the multifunction switch before you disconnect its electrical access points to remove the switch component. Place the multifunction switch in position then fasten its two torx(R) bolts and tighten them firmly to 7 nm (62 inch lbs.). Set up the electrical wiring and attach the interface connections before putting back the steering column shields along with the left panel cover and Steering Wheel while installing the tilt lever. Finally, enable the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Turn Signal Switch and hazard switch on Buick LeSabre? Posted by Customer
    A:
    Before working on the Turn Signal Switch you must shut off the sir system. Take out the Steering Column trim cover using the Turn Signal Switch retaining screws and disconnect its electrical connections before removing the switch. Set the Turn Signal Switch onto the Steering Column and attach it with its retaining screws before tightening them to 7 nm (62 inch lbs.). Feed the electrical cables through and restore their connections to the Steering Column trim before replacing its covers. Finally, enable the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the left IP trim plate for the 2001 Buick LeSabre? Posted by Customer
    A:
    Disconnect the electrical connectors (2,3).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    How do you remove the headlamp switch from the left IP trim plate for the 2002 Buick LeSabre? Posted by Customer
    A:
    Remove the fastener and tilt the headlamp switch to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What is the first step to service the headlamp switch for the 2000 Buick LeSabre? Posted by Customer
    A:
    Remove the left IP trim plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 26057323, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 26057323 Turn Signal Switch. It is sometimes referred to as GM Dimmer Switch, GM Headlight Switch, GM Turn Signal Switch, GM Wiper Switch. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 26057323 Turn Signal Switch. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery