How to replace the coil spring insulators on Buick Lucerne?

The first step to replace coil spring insulators consists of raising and supporting the vehicle. Start the replacement by lifting the wheel off the tire before placing your jack stand under the lower Control Arm. First disconnect the automatic level control air tube from the shock absorber before removing the lower shock absorber retaining bolts. The universal steering linkage puller (J 24319-B) will detach the adjustment link from the lower Control Arm after removing the adjustment link retaining nut. Drop the lower Control Arm onto the support assembly while slowly lowering it before using a pry tool to remove the lower Coil Spring Insulator and coil spring. To extract the upper Coil Spring Insulator you must pull downward. When installing components place the upper Coil Spring Insulator retainer into the vehicle body before mounting both the coil spring and lower insulator while making sure the insulator fully rests inside the lower Control Arm. Lift the lower Control Arm into position then bolt two shock fasteners to the Control Arm. Next install the lower shock absorber retaining bolts and tighten them to 24 nm (18 ft. Lbs.). Secure the adjustment link to the lower Control Arm by installing its retaining nut while tightening it to 50 nm (36 ft. Lbs.). To complete the repair place the automatic level control air tube onto the shock absorber before reinstalling the tire and wheel and dropping the vehicle to the ground.

OEM Buick Lucerne Coil Spring Insulator

Coil Spring Noise Insulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Spring Insulators found

View related parts
Buick Lucerne Spring Seat, Rear Driver Side
Part Number: 25710009
$53.48 MSRP: $104.71
You Save: $51.23 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Spring Seat, Rear Passenger Side
Part Number: 25710008
$104.65 MSRP: $229.87
You Save: $125.22 (55%)
ADD TO CART
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Spring Insulator, Rear
Part Number: 25703339
Product Specifications
- Other Name: Bumper, Rear Axle; Coil Spring Insulator; Spring Bumper; Upper Insulator; Spring Upper Insulator; Bumper; Bumper, Rear Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Spring Insulator, Front
Part Number: 15220802
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Spring Lower Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Spring Insulator, Front Upper
Part Number: 15220801
Product Specifications
- Other Name: Insulator-Front Spring Upper; Coil Spring Insulator; Spring Upper Insulator; Insulator, Front Spring
- Position: Front Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Spring Insulator, Rear Lower
Part Number: 25627582
Product Specifications
- Other Name: Insulator, Rear Spring Lower; Coil Spring Insulator; Lower Insulator; Spring Lower Insulator; Insulator; Insulator, Rear Spring
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

Buick Lucerne Coil Spring Insulator

Our website offers an extensive catalog of genuine Buick Lucerne Coil Spring Insulator at unbeatable prices. Every OEM Buick Lucerne Coil Spring Insulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Lucerne Coil Spring Insulator Parts Questions & Experts Answers

Spring Seat, Rear Driver Side
25710009
Q: How to replace the coil spring insulators on Buick Lucerne?
A: The first step to replace coil spring insulators consists of raising and supporting the vehicle. Start the replacement by lifting the wheel off the tire before placing your jack stand under the lower Control Arm. First disconnect the automatic level control air tube from the shock absorber before removing the lower shock absorber retaining bolts. The universal steering linkage puller (J 24319-B) will detach the adjustment link from the lower Control Arm after removing the adjustment link retaining nut. Drop the lower Control Arm onto the support assembly while slowly lowering it before using a pry tool to remove the lower Coil Spring Insulator and coil spring. To extract the upper Coil Spring Insulator you must pull downward. When installing components place the upper Coil Spring Insulator retainer into the vehicle body before mounting both the coil spring and lower insulator while making sure the insulator fully rests inside the lower Control Arm. Lift the lower Control Arm into position then bolt two shock fasteners to the Control Arm. Next install the lower shock absorber retaining bolts and tighten them to 24 nm (18 ft. Lbs.). Secure the adjustment link to the lower Control Arm by installing its retaining nut while tightening it to 50 nm (36 ft. Lbs.). To complete the repair place the automatic level control air tube onto the shock absorber before reinstalling the tire and wheel and dropping the vehicle to the ground.