How to Replace Coil Springs on Buick Lucerne?

The coil spring replacement process starts with vehicle elevation followed by support. Lift off the tire and wheel before using a proper jack to maintain Control Arm position. Begin by disconnecting the automatic level control air tube from the shock and afterward remove the bolts retaining the lower shock absorber. After removing the hex nut you must use the universal steering linkage puller (J 24319-B) to disconnect the adjustment link from the lower Control Arm. Sustain the lower Control Arm while letting it drop against the support assembly. Use a pry bar to lift the lower Coil Spring Insulator and extract the coil spring alongside the insulator. You should pull down to extract the upper Coil Spring Insulator. Begin installation by first installing the upper Coil Spring Insulator to the body and then adding the lower Coil Spring Insulator into the Control Arm. When the coil spring fits correctly into the Control Arm's position raise the Control Arm to install both shock absorber retaining bolts with a matching torque of 24 nm (18 ft. Lbs.). To install the adjustment link into the Control Arm use a retaining nut to lock it into place with a torque setting at 50 nm (36 ft. Lbs.). The automatic level control air tube installation process ends with hooking up the air tube to the shock absorber while also installing the tire and wheel and finally lowering the vehicle.

OEM Buick Lucerne Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Coil Springs found

View related parts
Buick Lucerne Coil Spring, Front
Part Number: 15781812
$61.63 MSRP: $110.07
You Save: $48.44 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15781811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25910862
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25910861
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25910860
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25910859
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25910858
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390204
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Rear
Part Number: 25901662
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Coil Spring, Front
Part Number: 25857394
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

Buick Lucerne Coil Springs

Our website offers an extensive catalog of genuine Buick Lucerne Coil Springs at unbeatable prices. Every OEM Buick Lucerne Coil Springs comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Lucerne Coil Springs Parts Questions & Experts Answers

Coil Spring, Front
15781812
Q: How to Replace Coil Springs on Buick Lucerne?
A: The coil spring replacement process starts with vehicle elevation followed by support. Lift off the tire and wheel before using a proper jack to maintain Control Arm position. Begin by disconnecting the automatic level control air tube from the shock and afterward remove the bolts retaining the lower shock absorber. After removing the hex nut you must use the universal steering linkage puller (J 24319-B) to disconnect the adjustment link from the lower Control Arm. Sustain the lower Control Arm while letting it drop against the support assembly. Use a pry bar to lift the lower Coil Spring Insulator and extract the coil spring alongside the insulator. You should pull down to extract the upper Coil Spring Insulator. Begin installation by first installing the upper Coil Spring Insulator to the body and then adding the lower Coil Spring Insulator into the Control Arm. When the coil spring fits correctly into the Control Arm's position raise the Control Arm to install both shock absorber retaining bolts with a matching torque of 24 nm (18 ft. Lbs.). To install the adjustment link into the Control Arm use a retaining nut to lock it into place with a torque setting at 50 nm (36 ft. Lbs.). The automatic level control air tube installation process ends with hooking up the air tube to the shock absorber while also installing the tire and wheel and finally lowering the vehicle.

Related Buick Lucerne Parts

Browse Buick Lucerne Coil Springs by Years

2011 2010 2009 2008 2007 2006