Make sure this part fits

GM 25910862
Coil Spring, Rear

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 25910862 Coil Spring, Rear
GM 25910862 Coil Spring, Rear
  • Part Description
    Spring, Rear Spring; Coil Springs
  • Position
    Rear
  • Replaces
    10390208
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25910862 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25910862 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the coil spring be positioned for the 2006 Buick Lucerne? Posted by Customer
    A:
    Ensure the coil spring is seated properly in the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tools are required to service and repair the suspension strut for the 2006 Buick Lucerne? Posted by Customer
    A:
    Strut Rod Nut Socket (J 35669) and Strut Spring Compressor (J 45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you compress the coil spring for the 2010 Buick Lucerne? Posted by Customer
    A:
    Turn the spring compressor forcing screw until the coil spring is compressed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should you do after removing the upper strut mount and coil spring for the 2008 Buick Lucerne? Posted by Customer
    A:
    Install the coil spring and upper strut mount back into the Strut Spring Compressor (J 45400) and compress the coil spring again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after removing the upper strut mount and coil spring for the 2009 Buick Lucerne? Posted by Customer
    A:
    Install the coil spring and upper strut mount to the J 45400, then turn the spring compressor forcing screw until the coil spring is compressed again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step in the installation process for the 2007 Buick Lucerne? Posted by Customer
    A:
    Place the upper coil spring insulator onto the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tool is used to compress the coil spring for the 2008 Cadillac DTS? Posted by Customer
    A:
    Turn the spring compressor forcing screw until the coil spring is compressed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the torque specification for the shock absorber lower retaining bolts for the 2009 Cadillac DTS? Posted by Customer
    A:
    Tighten them to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step in the assembly process for the 2007 Cadillac DTS? Posted by Customer
    A:
    Install the coil spring and upper strut mount back into the Strut Spring Compressor (J 45400) and compress the coil spring again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the final step regarding the electronic level control air tube for the 2006 Cadillac DTS? Posted by Customer
    A:
    Reconnect the electronic level control air tube to the shock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the final step after completing the installation for the 2007 Cadillac DTS? Posted by Customer
    A:
    Lower the vehicle and check the toe, adjusting if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after raising the lower control arm for the 2010 Cadillac DTS? Posted by Customer
    A:
    Install the two shock bolts and tighten them to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Rear 25910862 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25910862 Coil Spring, Rear is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25910862 Coil Spring, Rear fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 25910862 maintains top performance when functioning as the Spring, Rear Spring; Coil Springs unit at its Rear. The component 25910862 is constructed from durable material and its dimensions span 13.1 x 6.9 x 6.9 inches while weighing 5.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring. The part 25910862 has available replacement options 10390208. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.