How to Replace Coil Springs on 2007 Buick Lucerne?

Before installing a new coil spring begin by lifting and securing the vehicle. Start by removing the wheel and tire followed by placing a proper jack to hold the Control Arm in position. Unclamp the automatic level control air tube attached to the shock before removing the bolts securing the lower shock absorber. First remove the hex nut before using the universal steering linkage puller (J 24319-B) to break apart the adjustment link from the lower Control Arm. Apply gradual pressure to the lower Control Arm so it touches down on the support assembly. To replace the coil spring and insulator use a pry bar beneath the lower Coil Spring Insulator so you can remove both coil spring and insulator together. Lower downward motion will free up the upper Coil Spring Insulator. Install the upper Coil Spring Insulator to the body before placing the lower Coil Spring Insulator within the Control Arm. Place the coil spring into position while making sure the lower Control Arm has the insulator in its proper seat. After raising the lower Control Arm install all shock absorber retaining bolts with a torque setting of 25 n.m then finish tightening them to 18 lb ft. Screw in the adjustment link to the Control Arm before tightening the retaining nut to 30 n.m (22 lb ft) while simultaneously twisting it an additional 180 degrees. The automatic level control air tube can be reconnected to the shock absorber before reinstalling the tire and wheel followed by the vehicle's descent.

OEM 2007 Buick Lucerne Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Springs found

View related parts
2007 Buick Lucerne Coil Spring, Front
Part Number: 15781812
$61.63 MSRP: $110.07
You Save: $48.44 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15781811
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.8 x 7.3 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15781812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Coil Spring, Rear
Part Number: 25910862
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390208
- Item Weight: 5.70 Pounds
- Item Dimensions: 13.1 x 6.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910862
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Coil Spring, Rear
Part Number: 25910859
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390205
- Item Weight: 5.70 Pounds
- Item Dimensions: 12.4 x 6.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Coil Spring, Rear
Part Number: 25910858
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390204
- Item Weight: 5.60 Pounds
- Item Dimensions: 15.0 x 7.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Coil Spring, Rear
Part Number: 25910861
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390207
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.9 x 6.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Coil Spring, Rear
Part Number: 25910860
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390206
- Item Weight: 4.70 Pounds
- Item Dimensions: 11.7 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2007 Buick Lucerne Coil Springs

With a comprehensive array of OEM 2007 Buick Lucerne Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Coil Springs Parts Questions & Experts Answers

Q: How to Replace Coil Springs on 2007 Buick Lucerne?
A: Before installing a new coil spring begin by lifting and securing the vehicle. Start by removing the wheel and tire followed by placing a proper jack to hold the Control Arm in position. Unclamp the automatic level control air tube attached to the shock before removing the bolts securing the lower shock absorber. First remove the hex nut before using the universal steering linkage puller (J 24319-B) to break apart the adjustment link from the lower Control Arm. Apply gradual pressure to the lower Control Arm so it touches down on the support assembly. To replace the coil spring and insulator use a pry bar beneath the lower Coil Spring Insulator so you can remove both coil spring and insulator together. Lower downward motion will free up the upper Coil Spring Insulator. Install the upper Coil Spring Insulator to the body before placing the lower Coil Spring Insulator within the Control Arm. Place the coil spring into position while making sure the lower Control Arm has the insulator in its proper seat. After raising the lower Control Arm install all shock absorber retaining bolts with a torque setting of 25 n.m then finish tightening them to 18 lb ft. Screw in the adjustment link to the Control Arm before tightening the retaining nut to 30 n.m (22 lb ft) while simultaneously twisting it an additional 180 degrees. The automatic level control air tube can be reconnected to the shock absorber before reinstalling the tire and wheel followed by the vehicle's descent.