Make sure this part fits

GM 25910860
Coil Spring, Rear

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 25910860 Coil Spring, Rear
  • Part Description
    Spring, Rear Spring; Coil Springs
  • Position
    Rear
  • Replaces
    10390206
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25910860 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25910860 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the assembly process for the 2006 Buick Lucerne? Posted by Customer
    A:
    Install the coil spring and upper strut mount into the Strut Spring Compressor (J 45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after removing the upper strut mount nut for the 2008 Buick Lucerne? Posted by Customer
    A:
    After removing the strut from the Strut Spring Compressor (J 45400), loosen the compressor forcing screw until the upper strut mount and coil spring can be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What follows the placement of the upper coil spring insulator for the 2007 Buick Lucerne? Posted by Customer
    A:
    Place the lower coil spring insulator in the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to replace the coil spring for the 2006 Buick Lucerne? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tool is needed to hold the strut shaft while removing the upper strut mount nut for the 2010 Buick Lucerne? Posted by Customer
    A:
    A 45 TORX(R) socket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How should the strut be prepared for spring compression for the 2009 Buick Lucerne? Posted by Customer
    A:
    Install the strut in the J 45400 (Strut Spring Compressor) and ensure the spring is compressed when the strut moves freely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the procedure for attaching the adjustment link for the 2007 Cadillac DTS? Posted by Customer
    A:
    Attach the adjustment link to the control arm, tightening it to 30 N.m (22 lb ft) and then an additional 180 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What needs to be detached from the lower control arm for the 2009 Cadillac DTS? Posted by Customer
    A:
    Detach the automatic level control link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you ensure the spring is compressed for the 2007 Cadillac DTS? Posted by Customer
    A:
    Turn the spring compressor forcing screw until the coil spring is compressed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be reconnected after installing the coil spring for the 2010 Cadillac DTS? Posted by Customer
    A:
    Reconnect the electronic level control air tube to the shock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you ensure the spring is compressed when working with the strut for the 2008 Cadillac DTS? Posted by Customer
    A:
    Install the strut into the Strut Spring Compressor (J 45400) and ensure the spring is compressed when the strut moves freely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after reinstalling the tires and wheels for the 2006 Cadillac DTS? Posted by Customer
    A:
    Tighten the wheel nuts to 125 Nm (80 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Rear 25910860 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25910860 Coil Spring, Rear is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25910860 Coil Spring, Rear fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 25910860 maintains top performance when functioning as the Spring, Rear Spring; Coil Springs unit at its Rear. The component 25910860 is constructed from durable material and its dimensions span 11.7 x 6.7 x 6.8 inches while weighing 4.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring. The part 25910860 has available replacement options 10390206. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.